Najnowsze informacje o produktach

More than 99 percent yield, less filtration, without SIP and CIP: GEA presents new single-use pharmaceutical separator kytero®.

22 Aug 2022

GEA World premiere: With the kytero® 2000 Single-Use Pharma Separator, GEA presents another single-use centrifuge with the proven technology of the large GEA Pharma centrifuges at ACHEMA 2022 in Frankfurt. The pharmaceutical specialist is thus once again fulfilling the wishes of its renowned global pharmaceutical customers for a single-use machine that excels in terms of high yield, ease of operation and compactness. The kytero is ready for production in just a few minutes. Filter areas can be saved by up to 75 percent. The system requires only a conventional power connection; intermediate tanks are a thing of the past. CIP (clean-in-place) and SIP (sterilize-in-place) are eliminated thanks to the simple exchange concept.

GEA presents the new single-use pharmaceutical separator kytero® at ACHEMA 2022. (Photo: GEA)

GEA presents the new single-use pharmaceutical separator kytero® at ACHEMA 2022. (Photo: GEA)

While the kytero ® 500, which is in high demand worldwide, was a machine for research and development and small-scale production, the kytero® 2000 is suitable for pilot-scale and production applications, such as cell harvesting. The kytero® 2000 processes mammalian cell cultures from 150 to 500 liters per hour and E.coli from 30 to 120 liters per hour. At just over 99 percent for mammalian cells, the yield is very high.

With the kytero® series, GEA engineers have now succeeded in making single-use separators with disc stack technology available to manufacturers in the single-use process. The proven technology of the large steel separators is characterized by its high efficiency, gentle production process, fast processing and compactness.

Reduction of filter areas by up to 75 percent possible

In contrast to filtration, centrifugation does not separate the medium by means of filter media (filter plates and filter cloths), but by utilizing the centrifugal force that occurs in conjunction with a disk pack for increased clarification efficiency. The mobile "Plug & Produce" unit kytero© with minimal footprint fits easily into any production room and laboratories.

The proven GEA feed system guarantees particularly gentle product treatment. The vitality of shear-sensitive products is preserved. Product runs and scientific investigations at the ZHAW School of Engineering in Zurich have confirmed this.

100 percent biocontainment

With the single-use separator, all parts in contact with the product are replaced after use, preventing any cross-contamination without the need for cleaning and sterilization. The frictionless drive system provides 100 percent biocontainment by eliminating the need for seals or mechanical bearings. Set-up and changeover time (only five to ten minutes for preparation) is minimal. No utilities such as water, buffers or tanks are required. Changing single-use parts is very easy using aseptic connector systems. The design of the aseptic connector system makes the exchange of single-use components fast and very easy.

The elimination of CIP and SIP processes eliminates not only labor, but also the cost of chemicals, ultrapure water and energy.

Sophisticated drive system ensures low noise level

GEA engineers have developed an unprecedented drive for kytero®: GEA breezeDrive®. This frictionless drive system ensures that no contamination of the product can occur, as the system completely dispenses with a conventional drive with spindle, mechanical seal, and mechanical bearing.

The noise level is very low at less than 69 dBA due to the newly developed breezeDrive® drive system.

The unavoidable temperature increase of the product during centrifugation is minimal at less than two degrees.

GEA provides test machines

GEA provides test machines. Interested parties can obtain information and register at the web address www.gea.com/kytero.

Contact

Dr. Michael Golek

Phone: 49 211 9136 1505

Media Relations

GEA Group Aktiengesellschaft

Peter-Müller-Str. 12


40468

Düsseldorf


Germany

+49 211 9136-0

O GEA

GEA jest jednym z największych dostawców dla przemysłu przetwarzania żywności i wielu innych sektorów, w 2019 roku spółka wygenerowała skonsolidowane przychody na poziomie 4,9 miliarda euro.

Ta międzynarodowa grupa technologiczna specjalizuje się w produkcji maszyn, instalacji oraz technologii i komponentów procesowych. GEA dostarcza zrównoważone rozwiązania energetyczne na potrzeby skomplikowanych procesów produkcji na różnych rynkach użytkownika końcowego oraz oferuje wszechstronne portfolio usług. Około 70 procent przychodów grupy pochodzi z sektora żywności oraz napojów i alkoholi, w którym obserwowany jest długoterminowy i zrównoważony wzrost. Zgodnie ze stanem na 31 grudnia 2018 roku firma zatrudnia na całym świecie około 18 500 osób. GEA jest liderem rynkowym i technologicznym w segmentach biznesowych, w których prowadzi działalność. Spółka jest notowana na niemieckim indeksie MDAX (G1A, WKN 660 200), indeksie STOXX® Europe 600 Index oraz wybranych indeksach MSCI Global Sustainability. Więcej informacji można uzyskać w witrynie gea.com.
Otrzymuj nowości od GEA

Śledź innowacje i historie GEA, zarejestruj się do biuletynu z wiadomościami od GEA.

Skontaktuj się z nami

Jesteśmy po to, by Ci pomóc! Potrzebujemy kilku informacji, by odpowiedzieć na Twoje zapytanie.