4-Inch Horizontal Agi-Pompe on Pontoon
4-Inch Horizontal Agi-Pump on Pontoon
4-Inch Horizontal Agi-Pump on Pontoon
4-Inch Horizontal Agi-Pompe on Pontoon
4-Inch Horizontal Agi-Pump on Pontoon
4-Inch Horizontal Agi-Pump on Pontoon
Key Features
- 16" (406 mm) impeller with 4 curved blades made of ductile cast iron.
- Propeller with knife to cut fibrous material.
- 6" (150 mm) discharge.
- A winch is provided to lower the pump and to direct the propeller toward the bottom sediments.
- Extended anti-slip galvanized deck to reach the pump and the propeller.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 16' (4.9 m) long.
- Available motors: 15, 20, 25, 30, 40 or 50 HP (11, 15, 18.5, 22, 30 or 37 kW).
Typical Application
Used to agitate and transfer the rejected liquid from manure separators.
Downloads
関連製品
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
4-Inch High Pressure Pump on Pontoon
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
8-Inch Flush Pump on Pontoon
Low rpm pump offering high flow rate and remarkable performance to feed a flush system.
GEAインサイト
Shifts in food packaging: 4 trends
Thermoforming has long played a central role in food packaging. Now it is facing a major shift. As regulations tighten, materials evolve and costs rise, form fill seal lines must do more than run reliably – they now shape how food stays fresh, affordable and recyclable. Take a look at the key thermoforming trends informing the food packaging and delivery landscape.
