8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
Key Features
- The impeller housing can be adjusted to only pump the surface liquid stored.
- Low profile design for maximum stability.
- No seals or bearings submerged in the liquid.
- 8" (200 mm) high flow rate discharge
- The pump can be winched up for maintenance.
- Anti-slip galvanized steel deck.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 12' (3.7 m) or 16' (4.9 m) long.
- Available motors: 7.5, 10, 15, 20, 25, 30, 40 or 50 HP (5.5, 7.5, 11, 15, 18.5, 22, 30 or 37 kW).
Typical Application
Used to pump the surface liquid of a reservoir or of a lagoon when feeding a flush flume system or used to feed flush valves to clean manure alleys or a holding area.
Downloads
関連製品
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
4-Inch High Pressure Pump on Pontoon
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
GEA SmartFil M1 Powder packing system
小規模生産プラント向けの半自動粉末充填SmartFil M1 は、最大 100 袋/時のスピードで食品粉末の高品質充填を行います。
GEAインサイト
Shifts in food packaging: 4 trends
Thermoforming has long played a central role in food packaging. Now it is facing a major shift. As regulations tighten, materials evolve and costs rise, form fill seal lines must do more than run reliably – they now shape how food stays fresh, affordable and recyclable. Take a look at the key thermoforming trends informing the food packaging and delivery landscape.
