Key Features
- The pump can be installed in a hole as small as 16" (406 mm) in diameter.
- Direct drive only.
- Available motors: 3 or 5 HP. Not available for 50 Hz electric motor.
- 3" (75 mm) pipe discharge.
- Drive shaft with an anti-vibration bearing. Also available on bronze bushings without oil bath.
- Stainless steel threaded shaft to prevent rust and corrosion.
- Double bearing housing protected by our 3 seal system.
- Available in lengths from 6 to 16 feet (1.8 to 4.8 m)
Typical Application
Used to transfer hog manure or dairy waste water from a reception pit to the main storage.Impeller and Housing
- Impeller with 2 straight blades and sharp edges.
- Compact housing that fits in a small pit opening.
- 4" (102 mm) intake.
Downloads
関連製品
8-Inch Flush Pump
Low revolutions pump offering a high flow rate and remarkable performance to feed a flush system.
4-Inch Agi-Pompe
Stands out from the other pumps because of its ability to provide both high performance pumping and high efficiency agitation.
4-Inch High Pressure Pump
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
4-Inch Dairy Manure Pump
The perfect balance between pressure, flow rate and agitation quality for efficient and optimal results.
GEAインサイト
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
