Key Features
- Belt driven pump.
- Available motors: 7.5, 10, 15, 20, 25, 30, 40 or 50 HP (5.5, 7.5, 11, 15, 18.5, 22, 30 or 37 kW).
- 8" (200 mm) discharge.
- Drive shaft with an anti-vibration bearing.
- Double bearing housing protected by our 3-seal system.
- A check valve on the pump discharge keeps the liquid in the flush line between flushes.
- Available in lengths from 6 to 16 feet (1.8 to 4.8 m)
- Optional 6" (150 mm) nozzle with cast iron valve to recirculate the manure in the pit
Typical Application
The 8" Flush Pump is used when feeding a flush flume system, or to feed flush valves to clean flush alleys or to flush a holding area.Impeller and Housing
- 16" (406 mm) impeller with 4 curved blades made of ductile cast iron.
- 9½" (241 mm) intake with one fixed knife.
Downloads
関連製品
4-Inch Agi-Pompe
Stands out from the other pumps because of its ability to provide both high performance pumping and high efficiency agitation.
4-Inch High Pressure Pump
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
4-Inch Dairy Manure Pump
The perfect balance between pressure, flow rate and agitation quality for efficient and optimal results.
4-Inch Hog Manure Pump
An ideal pump to transfer low consistency liquid when a high flow rate and high pressure are needed.
GEAインサイト
Kytero 10、大きな変化は小さなことから始まります
GEA kytero 10により、バイオ医薬品、食品、ニューフード業界の研究者や開発者は、最新世代の強力な加速器を自由に使えるようになりました。
Fueling the circular economy in shipping
Ports now compete not just on logistics, but on sustainability. At Greece’s Piraeus port, an advanced processing and recovery facility recycles ship waste oil into fuel. Equipped with GEA’s high-performance centrifuges, it sets a new benchmark for state-of-the-art, environmentally responsible port operations.
