GEA UHT uses product-to-product heat transfer for efficient processing.
GEA UHT SYSTEM INDIRECT Product-to-Product
GEA UHT systems with product-to-product exchangers use the product itself for heat transfer, boosting efficiency over traditional indirect heating methods.
UHT Indirect Product-to-Product
GEAs indirect Product to Product UHT system is build around our heat exchanger technology and therefore operates on a similar principle to traditional indirect UHT units. However, instead of using water as the initial heat transfer medium, it uses the product itself for heat exchange. Our indirect product-to-product heat exchangers run the hot, sterilized product against the cold incoming product, enabling effective heat transfer between the products and creates a direct heat recovery loop. Heat exchange occurs through tubes, so there is no physical contact between the incoming and outgoing product streams. Final sterilization is then carried out using our conventional product-to-water heat exchanger. Used for a wide range of liquid products, our system achieves high levels of heat recovery without increasing the heat exchange surface area. This technology is ideal for large-scale processing of products such as milk, dairy items, or juices, where energy efficiency and reduced operating costs are key. It results in lower overall energy consumption compared to traditional systems, reducing both operating costs and carbon footprint.
Key Features
Indirect product-to-product UHT
- Heat recovery: Indirect product vs. product heat exchangers use heat energy from the hot outgoing sterilized product to preheat cold incoming product.
- Indirect heating: There is no direct contact between the product and the heating medium. Heat is transferred from outgoing product to incoming product through a physical barrier.
- Regenerative heat exchange: A significant portion of heat used in the process is recovered and reused, enhancing energy efficiency. Typically, up to 90% of the heat can be recovered in this system.
Benefits
Indirect product-to-product UHT
- Uniform heating: The product vs. product heat exchanger design ensures that the incoming product is heated evenly, reducing the risk of over-processing and helping to maintain consistent product quality.
- Resource-efficient system: High energy efficiency and reduced waste heat align with sustainability goals, making the GEA system an environmentally friendly choice for manufacturers.
- High throughput: GEA UHT plants utilizing our indirect product-to-product heat exchanger technology are designed for continuous operation, and can process high volumes of product efficiently, making our technology ideal for high-demand production environments.
関連製品
GEA UHT system direct infusion
GEA UHT Infusion uses rapid steam heating to reduce heat load compared to indirect methods, preserving proteins, nutrients, flavor, and color for a fresher, more nutritious product.
GEA UHT system direct injection
GEA direct UHT cuts heat load vs. indirect methods, preserving proteins, nutrients, color, and flavor for better nutrition and fresher taste.
GEA UHT system indirect
GEA UHT Indirect ensures consistent, gentle heating for extended shelf life while maintaining product quality, stability, and energy-efficient performance.
GEA UHT system pilot
Our modular pilot UHT plant is highly flexible and designed for small-scale aseptic processing.
GEAインサイト
ヒートポンプが地域暖房の脱炭素化を加速
地球温暖化の影響は世界中でますます明らかになっています。あらゆる地域の町や都市が同じ課題に直面しています。それは、信頼性が高く、手頃な価格で、持続可能な供給源からの熱を地域社会に供給することです。GEAは、この分野の専門家であるGEA Heating & Refrigeration TechnologiesのヒートポンプマネージャーであるKenneth Hoffmannに、地球温暖化への迅速な対応について話を聞きました。
GEAと共に酪農のデジタル未来を生きる
酪農家のトムの目に留まったもの。従来の製品デモの代わりに、GEAはAR（拡張現実）によるイノベーションを紹介しました。これはGEAのインタラクティブなデジタル酪農場始まりにすぎません。
