4-Inch High Pressure Pump on Pontoon
4-Inch High Pressure Pump on Pontoon
4-Inch High Pressure Pump on Pontoon
4-Inch High Pressure Pump on Pontoon
4-Inch High Pressure Pump on Pontoon
4-Inch High Pressure Pump on Pontoon
Key Features
- The impeller housing can be adjusted to pump only the surface liquid stored.
- Low profile design for maximum stability.
- No seals or bearings submerged in the liquid.
- 6" (150 mm) discharge.
- The pump can be winched up for maintenance.
- Anti-slip galvanized steel deck.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 12' (3.7 m) or 16' (4.9 m) long.
- Available motors: 20, 25, 30 or 40 HP (15, 18.5, 22 or 30 kW).
Typical Application
Used to pump the surface liquid of a lagoon or of a pit to a flush tank or to feed low pressure center-pivot irrigation systems.
Downloads
関連製品
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
GEA SmartFil M1 Powder packing system
小規模生産プラント向けの半自動粉末充填SmartFil M1 は、最大 100 袋/時のスピードで食品粉末の高品質充填を行います。
8-Inch Flush Pump on Pontoon
Low rpm pump offering high flow rate and remarkable performance to feed a flush system.
GEAインサイト
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
