Combining efficiency with resource savings
Imagine adding value to your utilities savings and contributing to a more sustainable world. Only by choosing a GEA homogenizer.
GEA PureFlow is engineered to operate independently of the homogenizer, so that its maintenance does not affect machine operation and performance, allowing customers to save time and costs. The lifetime, quality and safety of the oil are all significantly improved by using the PureFlow.
How it works
The PureFlow receives the oil from the homogenizer’s lubricating unit tank. The oil is first forced into a strainer pre-filter, then pushed into the main filter, where long-staple cotton fibers capture particles as small as 1 micron. The PureFlow then applies a flash evaporation process to dehydrate the oil and remove chemical contaminants. Finally, the purified oil flows back inside the homogenizer.
Key benefits
- Continuous oil regeneration
- Up to 5-times longer oil lifetime*
- Up to 80% less oil consumption*
- No contamination or condensation
- Improved oil quality and operational safety
- Purifies even severely contaminated oil
Resource-efficient configuration for homogenizers
GEA PureFlow is part of the resource-efficient configuration for homogenizers. Learn more >>
*When compared to homogenizers without PureFlow.
Reimagine liquids
It may surprise you how many products need homogenization in their manufacturing process to make them more compatible with your daily life. Stabilization and a longer shelf life have always been among the highest priorities in many different processing industries but, especially nowadays, as lifestyles continue to change rapidly, they are becoming more and more valued.
Key benefits
- Continuous oil regeneration
- Up to 5-times longer oil lifetime*
- Up to 80% less oil consumption*
- No contamination or condensation
- Improved oil quality and operational safety
- Purifies even severely contaminated oil
Downloads
Prodotti correlati
Omogeneizzatori della Serie Ariete
Le macchine Ariete sono la tecnologia all'avanguardia per omogeneizzatori ad alta pressione potenti e affidabili e per soluzioni personalizzate.
AirFlow Water-Saving Unit for Oil Cooling
GEA AirFlow is the water-saving device for homogenizers that cools the oil in the transmission body and gearbox using air instead of traditional water‑based methods.
ReFlow Water-Saving Unit for Plungers
GEA ReFlow recirculates up to 95% of the plant process water used by high-pressure homogenizers to cool and lubricate plungers, thus making the operation of GEA Homogenizers more resource-efficient.
Approfondimenti GEA
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Oltre le macchine: come migliorare le prestazioni dell’impianto
Una macchina efficiente non garantisce automaticamente l'efficienza di uno stabilimento. Il vero miglioramento spesso inizia guardando oltre le singole attrezzature e comprendendo come i processi, i sistemi energetici e le decisioni operative si influenzino a vicenda. Si tratta di un approccio olistico pensato per individuare opportunità che altrimenti potrebbero sfuggire.
Come una valvola rivoluziona la produzione di alimenti e bevande
Negli impianti di produzione di alimenti e bevande, le valvole vengono solitamente azionate tramite aria compressa. GEA Hydract® Actuation Technology utilizza l'acqua all'interno di un circuito chiuso e controllato digitalmente. Il risultato è una valvola che può essere mantenuta esattamente in posizione e regolata con per piccoli incrementi con grande precisione. Ciò si traduce in un minor consumo energetico e in un maggiore controllo.
