KoolWay® Chillers

Reliable, efficient cooling systems

GEA offers a complete line of packaged and remote air-cooled chillers, water-cooled chillers and cabinet chiller systems. Each model is supplied standard with the proven Spiral Drum Heat Exchanger.

Key Features and Benefits of the KoolWay® Systems

Spiral drum evaporator — each model is supplied standard with the proven Spiral Drum Heat Exchanger.
Horizoncircuited air-cooled condenser — is supplied standard with the Horizon circuited condensers. The finned receiver and sub-cooling circuits deliver one of the most efficient condensers available.
Stainless steel glycol pumps — system is supplied standard with an internal Chiller Evaporator Pump and a Dedicated Glycol Process Pump for the plate heat exchanger.
Total Cooling Control (TCC) — an optional micro-processor controller that can be installed on all semi-hermatic chiller packages. The independent control cards provide superior compressor, condenser, evaporator and pump control.

 
Spiral Drum

KoolWay® Packaged Air-Cooled Chillers

Total packaged system for ease of installation and start up

  • Available with a single or dual 10, 20, 30, 40 and 50 horsepower compressor to provide the most efficient match to cooling load
  • Available with Bitzer™ or Carlyle™ semi-hermetic compressors for better efficiency and dependability
  • Total packaged system for ease of installation and start up
  • Pre-charged and pre-run at the factory; ready to perform
  • Built in a controlled environment to eliminate defects caused by contaminations that can sometimes be found with field-installed piping
  • Must be installed outdoors

 

KoolWay® Remote Air-Cooled Chillers

Get installation flexibility, efficiency and dependability

  • Available in multiples of 10, 20, 30, 40 and 50 horsepower compressor to provide the most efficient match to cooling load
  • Available in single-, dual and triple-compressor base units
  • Available with Bitzer™ or Carlyle™ semi-hermetic compressors for better efficiency and dependability
  • Base units can be installed indoors; the remote air-cooled condensers must be installed outdoors.
  • Remote condensers offer a greater degree of installation flexibility
NOTE: Refrigerant must be ordered locally.

 

KoolWay® Water-Cooled Chillers

Pre-charged and pre-run at the factor – ready to perform!

  • Available in multiples of 10, 20, 30, 40 and 50 horsepower compressor to provide the most efficient match to cooling load
  • Available in single-, dual and triple-compressor base units
  • Available with Bitzer™ or Carlyle™ semi-hermetic compressors for better efficiency and dependability
  • Base units must be installed indoors
  • Pre-charged and pre-run at the factory; ready to perform
  • Built in a controlled environment to eliminate defects caused by contaminations that can sometimes be found with field-installed piping

 

KoolWay® Classic Chillers

Ideal when you need to add capacity to any existing chiller system

  • Available in multiples of 10, 20, 30, 40 and 50 horsepower compressor to provide the most efficient match to cooling load
  • Available in single and dual-compressor systems
  • Available with Bitzer™ or Carlyle™ semi-hermetic compressors for better efficiency and dependability
  • Classic units must be installed outdoors
  • Pre-charged and pre-run at the factory; ready to perform
  • Built in a controlled environment to eliminate defects caused by contaminations that can sometimes be found with field-installed piping
NOTE: Supplied with circulation pump but contains no glycol tank.

 

KoolWay® Cabinet Chillers

System designed without condensing units

 

  • These smaller systems are designed for use with remote-mounted condensing units to offer flexibility in installation and with available power supplies. (Ideal for smaller installations or installations without access to three-phase power.)
  • Customer-existing condensing units or new condensing units can be installed on the cabinet chillers
  • System includes evaporators, circulation and process pumps, and electrical enclosures
  • Cabinets should be installed indoors
  • Available in 3-5 HP models, 2-15 HP models and 2-30 HP models
  • Remote condensing units offer a greater degree of installation flexibility
NOTE: Refrigerant must be ordered locally.
 

!Tenga en cuenta que está en una página global. Para obtener la información más reciente sobre la disponibilidad de este producto en su región, póngase en contacto con su representante local.

Contacte con nosotros