Check valves open automatically by the pressure of the medium
RVAK Stop Check Valves
GEA check valves open autonomously by the pressure which is exerted by the working medium upon the valve disc. RVAK stop check valves have a lifting stem to permanently close the valve and a cone on the underside of the valve disc to regulate the medium flow. They start to open at a differential pressure of 0.01 to 0.05 bar and are fully open between 0.1 and 0.2 bar. As soon as the flow is interrupted or the flow direction is reversed, the valve closes automatically. Additionally, RVAK stop check valves may also be closed manually with a handwheel or a ratchet attached to the lifting stem. Rotating the stem clockwise will keep the valve disc down on the valve seat and therefore keeps the valve closed, counter-clockwise rotation will enable the valve disc to be opened by the pressure of the medium. The cone on the underside of the valve disc allows the medium flow to be regulated. The maximum diameter of the cone corresponds to the valve’s nominal diameter. The built-in damping device makes this type of valve especially suitable in cases where the power requirement / flow rate fluctuates. GEA stop check valves are designed for installation in the refrigerant circulation of industrial refrigeration systems. They are installed on either the pressure or suction side of compressors or in pipes in which only one direction of flow is intended. The spindle sealing is provided by a threaded bush with spring-elastic PTFE ring.
Stop Check Valve type RVAK
Technical features
- Available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerant as per EN 378 p. 1, e. g. NH3, R22, R134a and blends with refrigerator oil; neutral, gaseous and liquid mediums; glycol-based cold brine
- Installation is possible in horizontal and vertical position for upward flow direction
- Optionally available without damping
| RVAK stop check valves | |
| material | steel or stainless steel |
| nominal size | DN 10-150 |
| nominal pressure level | PS 25, PS 40, PS 63 |
| temperature range for standard valves | -60 °C to +150 °C |
| temperature range for HT valve series | -10 °C to +200 °C |
| connection | butt welding and flanged ends as per DIN and ANSI
brazed ends threaded ends |
| other | available with cover extension and linear ball bearing |
Downloads
Related Products
RVZ Check Valves
Check valves featuring a clamp design with or without integrated damping or with integrated damping and linear spindle bearing.
RVA Stop Check Valves
Check Valves with a rising stem with a PTFE-ring seal on the stem - lockable.
RV Check Valves
Valves that are locked automatically by reversed flow direction.
Service Products
GEA Ammonia Dryer
The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.
GEA Service Kits for screw and reciprocating compressors
Welcome to the world of simplicity with GEA Service Kits for screw and reciprocating compressors. Our mission is clear - to make your experience with original spare parts seamless and your operations smoother than ever. "Take it easy, use a kit" is not just a tagline – it is a promise we deliver on.
PR-OLEO® Premium-Quality Ammonia Refrigeration Oils
PR-OLEO® ammonia oils are the natural choice to optimize industrial cooling and heating applications operating with reciprocating or screw compressors.
GEA Insights
Farmers reap benefits of tailored GEA batch milking system
Automated milking has become the first choice for many modern dairy farms. The benefits are compelling, and with a new batch milking solution from GEA, automated group milking for large dairy herds is possible without the need – and expense – of rebuilding existing facilities.
GEA earns EcoVadis Platinum again – with higher score
GEA has once again earned the highest rating – Platinum – in the globally recognized EcoVadis sustainability assessment. With a score of 92 out of 100, the machinery and plant manufacturer has improved significantly from last year’s result of 82 points. For the second year in a row, GEA ranks among the top one percent of more than 150,000 rated companies across 185 countries.
How Carlsberg keeps 10,000 valves in play
At Carlsberg’s Fredericia brewery, GEA VARIVENT valves are part of a long-game strategy. By reusing core valve bodies, retrofitting actuators and control tops, and planning maintenance around brewing seasons, Carlsberg extends asset life, reduces downtime and supports its ambitious water and sustainability targets.
