Centrifugal Separator
GEA separators are designed for liquid-based applications. Using centrifugal force, they are used for separating suspensions consisting of two or more phases of different densities, i.e. they can be used for liquid-liquid separation, for liquid-liquid-solid separation or for liquid-solid separation. They are equally as effective at separating liquid mixtures at the same time as removing solids.
The fields of application range from separating processes in the chemical and pharmaceutical industries through oil and fat recovery to the production of dairy products, beer, wine, fruit and vegetable juices, as well as the processing of mineral oil and mineral oil products.
Separators have disk or annular chamber bowls. They operate continuously in respect of the discharge of the liquid phases. In respect of solids discharge they work either discontinuously (e.g. discontinuous disk-type centrifuges which must be stopped so that the collected solids can be removed by hand), semi-continuously (self-desludging disk type centrifuges = self-cleaning separators) or fully continuously (nozzle-type separators).
GEA separators are available with different types of drives: gear drive, belt drive, direct drive and integrated direct drive. The later is the next genuine stage in evolution in the separator construction process and works without motor shaft, gear, belts, coupling and motor bearing. The smaller number of installed components not only reduce the energy losses – they also reduce the maintenance costs, thus enhancing the availability of the machine. The space requirement of the integrated direct drive is approximately one third lower than is the case with equivalent gear or flat belt machines.
GEA separators with integrated direct drive can also be used in a very flexible manner. The bowl speed is infinitely variable within a specific range without change in transmission ratio. In addition, the maintenance process itself has been very much simplified. For instance, it is possible for the spindle to be taken out of the bearing housing only by loosening the bolts. The innovative design of the integrated direct drive also enables the motor to be replaced complete with the drive within only a few hours when maintenance work has to be carried out – this is time which is very valuable and which can be used productively elsewhere.
Products
Showing 4 of 8
Bacteria Removal Separators for Milk and Whey
Bacteria removal separators from GEA efficiently remove bacteria and spores from the raw and vat milk and whey.
Clarifiers for Milk, Whey and Calcium Phosphate
GEA clarifiers are used in the dairy industry to improve quality.
Compact Milk Pasteurizer MWA for Milk, Cream and Whey
Pre-assembled and pre-tested compact milk pasteurizer units with integrated skimming separator for milk, cream and whey pasteurizing (2000 - 35,000 l/h).
GEA milk Pasteurizer
Compact and pre-assembled milk pasteurizer with a skimming centrifuge
Downloads
Service Products
GEA Marine Bowl Service
GEA Marine Bowl Service offers clearly defined service levels with fixed pricing and bundles service expertise in a dedicated competence center.
GEA marine Upgrade Kit for separators
Designed to automate various separator processes, the GEA marine Upgrade Kit features advanced software and easy-to-use hardware components for seamless integration. By extending the capabilities of our marine separators, this solution improves efficiency and promotes environmental sustainability.
International Repair Network for GEA Centrifuges
Corrective repairs for your GEA separators and decanters
Remote FATs for GEA Centrifuges
Is a FAT (Factory Acceptance Test) of your centrifuge not possible on site due to current travel restrictions, a very tight schedule or other urgent reasons? Are you generally looking for ways to make business processes more digital and to sustainably reduce costs and time?
Here, too, we are at your side with the professional quality you are accu...
GEA SAFEXPERT®
The innovative process diagnostic and consultant service.
Related Videos
GEA EngySpeed – for resource-saving milk skimming
GEA Insights
Arla cuts spray dryer CO₂ with GEA AddCool® system
GEA AddCool® installation cuts CO2 emissions associated with the operation of a spray dryer plant by 1,500 tons per year at Arla’s milk powder factory in Svenstrup, Denmark.
GEA rings opening bell, celebrating DAX debut
On Sept. 30, 2025, GEA rang the opening bell at the Frankfurt Stock Exchange, a symbolic moment that highlighted the company’s inclusion in Germany’s leading stock index, the DAX.
A headquarters with people and purpose at its core
GEA’s new corporate headquarters in the up-and-coming Derendorf neighborhood of Düsseldorf, Germany, brings together people, ideas and expertise under one roof. With its open spaces, green terraces and energy-efficient design, the building reflects the company’s commitment to collaboration and sustainability.
