Steeping conditioned milling concept
GEA MILLSTAR® milling system
MILLSTAR® stands for convincing performance in the brewhouse. In terms of capacity, it can compete with any other milling system and method. In addition, it requires comparably low capital expenditure and has an excellent cost-benefit ratio.
Performance creates efficiency
The MILLSTAR® is known for its convincing performance in the brewhouse. With regard to capacity, it can compete with any other milling system and method, requiring a comparably low capital expenditure with an excellent cost-benefit ratio.
No compromises on beer quality
With its special milling method and gentle grain treatment, the MILLSTAR® contributes to a higher wort quality. Instead of finely grinding the grain, it is crushed in a way that ensures optimal extraction and subsequent wash-out in the lauter tun. This not only enables higher lauter tun loads, it also — owing to the smaller surface area and fast processing — makes the crushed grain less susceptible to oxidation and preserves both the quality and flavor stability of the beer.
Compact design, easy upgrade
Designed for convenience, the MILLSTAR® is available in seven different sizes. Steeping conditioning, crushing and mashing-in take place in one unit. Owing to its compact footprint, the space requirements are much lower than for conventional dry milling systems.
GEA Crushing Roller Regrooving Service
GEA is your reliable partner for the entire life cycle of your plant. This also includes regrooving the crushing rollers installed on your MILLSTAR® or other wet milling system. Our partnership provides quality, safety and sustainability.
Example MILLSTAR® 40t/h
| Regrooving by third party contractor | Regrooving by GEA | |
| Possible number of regrooving cycles | 8 | 12 |
| Operating hours between regroovings | 1,250 | 1,250 |
| Total operating hours | 10,000 | 15,000 |
Benefits at a glance
- Eccentric screw pump for mashing-in: malt to water ratios of up to 1:2 (without rinsing) can be reliably handled
- Level control in mash hopper for low oxygen uptake
- Quality automation system: feed roller speed control based on grist throughput rates provides adjusted steeping time for ‘harder’ malt batches (standard for MILLSTAR® 5–40 t)
- Steeping water temperature and flow are individually adjustable (standard for MILLSTAR® 5–40 t)
- Precise and easy adjustment of the crushing roller gap
- Large rollers for optimal crushing and husk conservation
- On request, inert gas flushing can be accommodated
- Less ATEX protection measures required because of the wet grist
What makes the MILLSTAR® so special
- Hygienic design ensures simple and efficient cleaning
- Eccentric screw pump for mashing-in: malt to water ratios of up to 1:2 (without rinsing) can be reliably handled
- Level control in mash hopper for low oxygen uptake
- Optimized spray geometry to reduce mash flotation
- Quality automation system: feed roller speed control based on grist throughput rates provides adjusted steeping time for ‘harder’ malt batches (standard for MILLSTAR® 5–40 t)
- Steeping water temperature and flow are individually adjustable (standard for MILLSTAR® 5–40 t)
- Precise and easy adjustment of the crushing roller gap
- Large rollers for optimal crushing and husk conservation
- Mash acidification is possible directly in the mill
- On request, inert gas flushing can be accommodated
- Less ATEX protection measures required because of the wet grist
Downloads
GEA Insights
Fueling the circular economy in shipping
Ports now compete not just on logistics, but on sustainability. At Greece’s Piraeus port, an advanced processing and recovery facility recycles ship waste oil into fuel. Equipped with GEA’s high-performance centrifuges, it sets a new benchmark for state-of-the-art, environmentally responsible port operations.
Closing the loop: key lessons for breweries from OeTTINGER
The 2022 CO2 shortage forced breweries to review their dependency on global supply chains. Many were forced to close, unable to carbonate their products. At its breweries in Germany, OeTTINGER GETRÄNKE is turning its own CO2 into a powerful lever for independence and sustainability – with the help of CO2 recovery technology from GEA.
Staying the course: Q&A with GEA's Chief Sustainability Officer
In a shifting political and economic landscape, GEA stays the course. We spoke with Dr. Nadine Sterley, GEA’s Chief Sustainability Officer, about why sustainability remains central to the company’s business strategy, how GEA is progressing on its ambitious goals and what it takes to turn words into action.
