Rotating Cleaners

Spray Tank Washer Torus 50/75/100

The spray cleaner Torus is ideally suited for applications where low flow and low pressure demands are critical. The ability to operate from pressures as low as 1 bar enables the Torus to clean many areas usually cleaned by manual means as well as replacing static spray balls with a more dynamic wash. The unique design of the rotating disc of water provides instant and effective total coverage across the inside of the vessel. This action provides consistent repeatable cleaning.


Wash fluid enters a drive chamber creating a disc of moving water. The wash fluid exits the unit through the small number of slots in the external disc. The specially designed pattern of slots ensures the high energy droplets use the minimum amount of wash fluid to deliver optimum performance.


  • Hygienic design
  • Economic flow rates
  • Low operating pressure
  • FDA conform
  • Versatile range of applications
  • Preferred mounting position: any
  • Available for tank safety system VARITOP®


Torus ideally suited to low flow and low pressure applications. The high energy, fast moving droplets provide very effective impingement up to two meters, meaning a single unit can clean vessels up to four meters diameter. 

Torus is used in applications such as glove box / biohazard containment areas or to replace standard spray balls in larger vessels. It meets all essential FDA material requirements. This makes the unit highly suitable for the pharmaceutical, biotech, food, beverage and other hygiene conscious industries.

Technical Data
Torus 50 Torus 75 Torus 100
Recommended pressure 1 – 4 bar (14.5 - 58 psi)
Cleaning diameter max. 2.2 m
(7.2 ft)
max. 3.3 m
(10.8 ft) 
up to 4.8 m (15.7 ft)
Flow rate 0.9 - 2 m³/h 
15 - 33.3 l/min 
4 - 8.8 USgpm
1.8 - 4.6 m³/h 
30 - 76.7 l/min 
7.9 - 20.3 USgpm
3 – 7.1 m3/7 
50 - 118.3 l/min 
13.2 - 31.3 USgpm)
Spray pattern 360°, optional 180°
Operating temperature max. 65 °C (149 °F)
Ambient temperature max. 75 °C (167 °F), 30 min
Insertion opening

BSP/NPT min. Ø 42 mm (1.65 inch) / Pin Fix 58 mm (2.38 inch)

BSP/NPT min. Ø 52 mm (2.05 inch) / Pin Fix 68 mm (2.38 inch)

min. Ø 85 mm (3.35 inch)

Materials Stainless steel 316L (1.4404) 
with P-PTFE or C-PTFE
Pipe connection 3 / 8 " BSP / NPT female, 
Pin Fix for ½" OD pipe (12.7x1.6 mm)
½" BSP / NPT female, 
Pin Fix for  ¾" OD pipe (19.05x1.6 mm)
PinFix for 1" OD pipe (25.4x1.6mm)
Weight approx. 0.1 kg (0.22 lbs) approx. 0.15 kg (0.33 lbs) approx. 0.2 kg
(0.44 lbs)

Produtos relacionados

Service products

GEA Insights

Mantenha-se atualizado com as inovações e histórias da GEA, se registrando para receber notícias sobre a GEA.


Estamos aqui para ajudar! Com apenas alguns detalhes poderemos responder à sua pergunta.

Entre em contato