Using data for better fresh cow management

Cows eating

Fresh cows are one of the most important groups of animals on the dairy farm therefore, it is critical to monitor them closely. After a cow calves, she is more likely to experience a health issue as she fully transitions to the lactating herd. Making fresh cow checks on your farm to monitor for health issues can easily and efficiently fit into your daily routines by utilizing reports and alarms to find exception cows that require immediate attention.

Fresh Cow Reports for Monobox/DairyRobot R9500 Users

The transition period for a dairy cow is defined as the time from when the cow is a pregnant dry cow to when she calves and enters into the lactating herd.  It is a very critical time of the cow’s life. This period plays a primary role in how she will perform throughout the duration of her lactation.  This means that close monitoring and quick action is needed if/when a concern is noticed, such as a drop in production, decreased visits to the robot, and reduced consumption in feed, for example. By using the data that can be found in DairyPlan through reports, and daily monitoring, a producer can take swift action to correct any issues or treat the animal accordingly.

A couple specific reports that are useful to monitor fresh cows in DairyPlan include:

  • Fresh Cows Monobox Attentions – This shows data from cows that are 1-21 DIM, including production and conductivity data. 
  • Monobox Fresh Cow Report – This is another useful report that shows the visits of fresh cows along with feed consumption data. 

These key reports, along with a multitude of original base reports available in DairyPlan (some of these are further discussed below) can assist you in finding the data you need to help ensure a successful transition period for your fresh cows. 

Left Herd Reports – Focus on Fresh Cows

When a cow perishes or is culled from the herd, we recommend that you enter a “left herd” reason to categorize why the animal is no longer in the herd, making it much easier to track disease incidence on your farm. Because DairyPlan is used on a wide-range of herds around the world, there are no pre-defined “left herd” reasons, so each farm is able to define a list that works for them.  For instance, if you do milk testing, the organization that does the testing, may have their own “left herd” reasons and you can use those for your farm. Or, you can define those “left herd” reasons on your own.  Either way you need to be consistent in recording “left herd” reasons to be able to track the data and determine the predominant reasons that cows are leaving the herd.  

Additionally, and very importantly, by looking at that “left herd” data, when it comes to fresh cows, can help you determine what problems you are facing in the transition cow area.  

Suggestions for “left herd” reasons:

  • Feet and leg issues
  • Business purposes
  • Low production
  • Reproduction problems
  • Other
  • Died
  • Mastitis issues
  • Abortion
  • Udder problems

A good report that can be utilized is the “Fresh Cows Leaving the Herd” report.  This report can be easily downloaded (ask your local GEA dealer for a link if needed).  Download the file and then paste it into C:\DairyPln folder of the DairyPlan computer.  Then, you can open the report from the main DPMenue choosing the “S” then “Evaluation” programs, and then, “DPList”.  Then you can open the report and adjust the date range in the upper left hand corner.  If you are metering in pounds the date format is MM-DD-YYYY.  If you are metering in kilograms then the date format is DD-MM-YYYY. 

As you can see in the report below, the top section is a summary area to show an overview of each of the “left herd” reasons. At this farm we have animals that left the herd between 1 and 60 DIM, and the “left herd” reasons that were used are 1, 3, 4, 6. For example, on this report we had three (3) cows leave the herd for reason 1 (which is feet and leg issues) that were between 1-60 DIM. They averaged 20 days in milk, the average age was 4.6 years old, and on average these cows were in their third lactation. Additionally, we can see the breakdown details of the individual cows in the two lower sections by lactation number. The first lactation animals are shown in the middle section and second lactation and above cows are shown in the bottom section.  

Cows leaving herd
Fresh cows calving

Find a local GEA dealer

When discussing feeding fresh cows in an AMS, you must also be sure to look at your overall goals for feeding the herd. Work with your GEA dealer or GEA herd management specialist along with your nutritionist to ensure the feed curves are set up optimally. To learn more about all of these reports available to you, or for assistance in setting them up on your farm, do not hesitate to reach out to your local GEA dealer or GEA Herd Management Specialist.
Máquina de ordenha robotizada DairyRobot R9500

EFFICIENCY FIRST - GEA AUTOMATIC MILKING SYSTEMS

The GEA robotic milking product line offers you the efficiency to milk more cows in a faster amount of time and the tools to better manage your herd throughout various stages of lactation. At the end of the day, that means you have the potential to achieve a quicker return on your investment with a more productive, thriving herd. GEA robots are armed with sophisticated software systems and management resources that are by your side, around the clock, delivering countless data points that can help you make faster, more accurate decisions. Plus, the trained specialists at our authorized robotic milking dealerships as well as our Herd Management teams within GEA are here to help customize that data for your farm, and be sure it is working for you to support the success of your operation for years to come. When it comes time to choose a robotic milking system for your farm, choose GEA.
Receba notícias da GEA

Mantenha-se atualizado com as inovações e histórias da GEA, se registrando para receber notícias sobre a GEA.

Entre em contato

Estamos aqui para ajudar! Com apenas poucos detalhes poderemos responder à sua pergunta.