Overflow valves independent from back pressure, spring loaded.
UVU OVERFLOW VALVES
GEA overflow valves are designed to be used as relief valves in the refrigerant circulation of industrial refrigerating plants. Overflow valves are safety devices for protecting the refrigerating system or its components from excess pressure (see also DIN 8975 part 7). They open independently from back pressure and close completely within a pressure drop of 10 % below the set response pressure. They comply with the technical regulations of the German Technical Control Board (TÜV).
Overflow Valve type UVU
Technical Features
- Available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerants as per EN 378 p. 1, e. g. NH3, R134a, R290 (propane), R507 and blends with refrigerator oil; neutral, gaseous and liquid mediums, glycol-based cold brine
- Installation position: vertical and horizontal
- Available valve seat seals:
- UVUA: PTFE seal, can be used at temperatures of -60 °C to +180 °C
- UVUB: elastomer seal, can be used at temperatures of -50 °C to +110 °C
| UVU OVERFLOW VALVES | |
| material | steel or stainless steel |
| nominal size | DN 10-32 |
| nominal pressure level | PS 25, PS 40, PS 63 |
| temperature range | UVUA: -60 °C to +180 °C
UVUB: -50 °C to +110 °C |
| temperature range for
HT Valve Series | -10 °C to +200 °C |
| connection | butt welding and flanged ends as per DIN and ANSI
brazed ends threaded ends |
| response pressure range | 4-63 bar |
Downloads
サービス製品
GEA Ammonia Dryer
The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.
PR-OLEO® 高品質アンモニア冷凍機油
PR-OLEO® 高品質アンモニア冷凍機油は、高度に精製された二段階水素化分解潤滑油で、往復圧縮機またはスクリュー圧縮機を搭載したアンモニア冷凍システム用として特別に考案されました。
スクリュー式およびレシプロ式コンプレッサー用GEAサービスキット
スクリュー式およびレシプロ式コンプレッサー用GEAサービスキットで、シンプルな世界へようこそ。GEAの使命は明確です。お客様に純正スペアパーツをシームレスにご使用いただき、これまで以上にスムーズなオペレーションを実現することです。「気楽に、キットを使って」は単なるキャッチフレーズではなく、私たちが果たす約束です。
