Strainers are equipped with a replaceable mesh from stainless steel in various mesh sizes.
GEA strainers are designed for installation in the refrigerant circulation of industrial refrigeration systems. They are equipped with a replaceable mesh from stainless steel in various mesh sizes. The insert is self-centring and is held in position by the cover. The medium flows through the mesh insert from the inside to the outside.
| SS Strainers | |
| material | steel or stainless steel |
| nominal size | DN 10-350 |
| nominal pressure level | PS 25, PS 40, PS 63, PS 160 |
| temperature range for standard valves | -60 °C bis +150 °C |
| temperature range for HT valve series | -10 °C bis +200 °C |
| connection | butt welding and flanged ends as per DIN and ANSI
brazed ends threaded ends |
| additional information | available mesh sizes (µm): 63 / 80 / 100 / 135 / 150 / 200 / 250 / 500 |


The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.

スクリュー式およびレシプロ式コンプレッサー用GEAサービスキットで、シンプルな世界へようこそ。GEAの使命は明確です。お客様に純正スペアパーツをシームレスにご使用いただき、これまで以上にスムーズなオペレーションを実現することです。「気楽に、キットを使って」は単なるキャッチフレーズではなく、私たちが果たす約束です。

PR-OLEO® 高品質アンモニア冷凍機油は、高度に精製された二段階水素化分解潤滑油で、往復圧縮機またはスクリュー圧縮機を搭載したアンモニア冷凍システム用として特別に考案されました。
Together with Mona Neubaur, Minister of Economic Affairs of the German state of North Rhine-Westphalia, GEA CEO Stefan Klebert has opened a new technology center for pharmaceutical freeze-drying systems in Elsdorf, Germany. GEA employs approximately 260 people at the facility, which combines research and development with production and service under one roof.