Key Features
- 3-point hitch with adjustable legs;
- 20" (508 mm) or 28" (711 mm) diameter impeller with 6 blades;
- Bearing assembly in oil bath protected by a 3 seal mechanism;
- Intake flapper valve with thick rubber to seal against a stainless steel pipe;
- 6" (152 mm) intake and discharge.
Options
- Maxi-Pump on trailer;
- Hand primer pump with 6" (152 mm) gate valve;
- Hydraulic motor on primer pump.
Maxi-Pump and Side Mount Agitator Kit
- Powerful surface and bottom agitation for fast mixing of manure;
- A 12" (305 mm) diameter rubber hose is installed between the Maxi-Pump and the reservoir to absorb vibrations.
Note: The Maxi-Pump can be installed above ground level to keep the environment clean and aid in draining the pump once the reservoir is empty.
Maxi-Pump and 45° Port Hole Agitator
- Positive agitation to minimize solid residue between the port holes of the pit;
- Loading capacity of up to 1 500 GPM (5 678 L/min.);
- Easily transfer to the spreader with the 6" (152 mm) X 20 foot (6 m) loading pipe on tripod with 45° elbow.
Maxi-Pump and Solid Manure Platform
- This configuration allows siphoning of the liquid alongside the wall of the platform to fill a liquid manure spreader;
- Reduces the time required to load manure.
Downloads
関連製品

Articulated Agi-Pompe
The concept of the articulated pumps offered by GEA is to have the pump attached to the tractor with a solid 3-point hitch and two hydraulic controlled articulations allowing positioning the pump into a lagoon or a concrete pit.

Articulated Super Pump
The Articulated Super Pump allows far-reaching access into concrete pits and provides power entirely concentrated on manure pumping.

Irrigation Pumps
Transfer liquid manure of a maximum consistency of ¼" (6 mm) at very high pressure.

Lagoon Agi-Pompe CA8
This model of lagoon Agi-Pompe is especially designed to manage manure in deep lagoons.
GEAインサイト

The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.




