GEA OptiPartner® NiSoMate® is a stand-alone, in-line sensor-based device designed to monitor key fluid parameters continuously and in real time during the entire production cycle. Quality monitoring is based on ultrasound technology, which defines the physical characteristics of the processed fluid by analyzing variations in the speed of sound passing through the product itself.
How it works:
Its sensors and temperature probes can measure fluid properties and quality both before and after homogenization, generating reliable reference curves. The many parameters that the device monitors include particle size distribution, dilution, density, change in consistency, and temperature among others.
OptiPartner® NiSoMate® can be calibrated directly in situ and on the product(s) to set the required quality: the registered parameters are then stored in the system as reference for in-line analysis. The calibration develops a fingerprint for up to 250 configurable recipes. Then, the device measures and stores the fingerprint of each recipe in the controller, using it as the set point for product evaluation.
During production, the operator selects the recipe on the device control panel, and the device continuously compares the measured parameters to the recipe’s fingerprint. When deviations from the recipe are detected, an alarm alerts the operator, allowing them to adjust operating parameters in real time.
This minimizes product waste by ensuring consistent quality throughout production, eliminating reliance on spot sampling.
Key benefits of GEA OptiPartner® NiSoMate®:
Energy efficiency. Designed to help operators achieve the required product quality at the lowest pressure possible, optimizing energy consumption. High versatility. Tailored to customer requirements, customizable for all kinds of products, and compatible with all installations – from table-top units to industrial plants, on both new and existing machines. Safety and hygiene. CIP and SIP able, it meets even the most demanding requirements in sanitary and aseptic lines. Sensors are not in direct contact with the product for maximum safety and hygiene. Reduced waste. Automated configuration, continuous monitoring, and real-time process adjustments reduce the risk of product rework and loss. Improved plant capacity. No need to wait for laboratory analysis on product samples maximizes machine availability.
Additional benefits:
OptiPartner® and NiSoMate® are registered as trademarks in several countries worldwide.
منتجات ذات صلة

سلسلة مجانسات Ariete
آلات Ariete عبارة عن أحدث تقنيات المجانسات الموثوقة عالية الضغط والحلول المخصصة.

مجانسات Ariete 5400 من GEA
يوفر مجانس Ariete 5400 أوسع سعة على الإطلاق (80.000 لتر/ساعة عند 120 بار) ويحقق أكبر قدر من التنوع في الاستعمال؛ بدءً من منتجات الألبان إلى المشروبات، ليس هذا فحسب ولكن أيضا في القطاعات الدوائية والكيميائية مع ضمان أقصى قدر من الكفاءة والتشغيل الآمن.

مجانسات Ariete 3160 من GEA
أداة مجانسة عالية الضغط من سلسلة Ariete متعددة الاستخدامات للغاية، وهي مخصصة جداً لمجموعة كبيرة من التطبيقات، التي تتضمن الألبان، والمشروبات، والمواد الغذائية، والصناعات الصيدلانية، وصناعات المواد الكيميائية، ومستحضرات التجميل.

المصنع التجريبي للمجانسات
تم تصميم مجانسات المصنع التجريبي لتشغيل يصل إلى 1500 بار وإنتاج محدود سهل التركيب بتقنية التوصيل والتشغيل، وتشغيل بسيط وصيانة سريعة.
رؤى GEA

الإنجاز الذي أحدث ثورة في مجال التجفيف بالرذاذ
في عام 1976، استجاب مهندسو شركة NIRO لتحدٍ تنافسي من خلال إعادة تصور الإمكانات التي يمكن أن يوفرها التجفيف بالرذاذ، وأثمرت فكرتهم عن المجفف متعدد المراحل (MSD). وبعد مرور خمسين عامًا، لا يزال هذا المبدأ الأساسي نفسه يساعد في تحويل السوائل إلى مساحيق تُستخدَم في منتجات التغذية الأساسية، والأدوية المهمة في جميع أنحاء العالم. بفضل الخبرة الهندسية المتراكمة على مدى عقود، وفهم احتياجات العملاء، والتطوير المستمر، يُعد MSD قصة ابتكار ذات تأثير دائم.

ما وراء الآلة: إطلاق العنان لأداء أفضل للمصنع
إن وجود آلة فعَّالة لا يعني بالضرورة وجود مصنع فعَّال. غالبًا ما يبدأ التحسين الحقيقي بالنظر إلى ما وراء المعدات الفردية، وفهم كيفية تأثير العمليات، وأنظمة الطاقة، وقرارات التشغيل على بعضها البعض. إنه نهج شامل يهدف إلى اكتشاف الفرص التي قد تُفوَّت لولا ذلك.

كيف يُحدث الصمام تغييرًا جذريًّا في طريقة تصنيع الأطعمة والمشروبات
في مصانع الأغذية والمشروبات، تُشغّل الصمامات عادةً باستخدام الهواء المضغوط. تعمل GEA Hydract® Actuation Technology على تحريك الصمامات باستخدام الماء بدلاً من ذلك، وذلك ضمن دائرة مغلقة يتم التحكم فيها رقميًا. والنتيجة هي صمام يمكن تثبيته بدقة في مكانه، وتوجيهه بخطوات دقيقة. وينتج عن ذلك انخفاض في استهلاك الطاقة، وتحسين مستوى التحكم.
