メニュー
  • 1712
    2019

    GEA: Award for milestones in separation technology

    The renowned trade magazine PROCESS has now honored GEA for its milestones in separation technology, which have had a decisive impact on the industry.

  • 1612
    2019

    GEA helps customers tackle F-Gas refrigerant legislation challenges

    The new European Union (EU) regulation on the use of partially fluorinated hydrocarbons (HFCs) in refrigeration systems (F-Gas Regulation) has significant implications for manufacturers, operators of refrigeration and air conditioning systems and heat pumps, as well as for service providers who, for example, offer maintenance and service for these systems.

  • 2811
    2019

    GEA Packaging Days 2019: Safe and sustainable food packaging that minimizes film use

    With sustainability increasingly important in food packaging, it’s only logical that packaging systems not only need to be efficient, safe and flexible but also conserve energy and resources. GEA product experts demonstrated the technology group’s solutions for this segment at this year’s Packaging Days, staged at the Biedenkopf plant (Germany) in November.

  • 2511
    2019

    Using a compact CO2 refrigerating plant to chill a fish catch in an environmentally-friendly way

    With a length of 45 metres, F/V Northern Defender, one of the trawlers in the fleet belonging to Global Seas headquartered in Seattle, Washington, delivers its catch to a shoreside factory for processing. She normally operates in the Bering Sea off Alaska and returns to port with up to 340 tons of pollock. For the fish to stay fresh during the voyage of up to several days, it is chilled with seawater at zero to minus one degree Celsius.

  • 2511
    2019

    The Cooling Club – the GEA Industry Forum for Refrigeration and Air Conditioning Technology

    How can refrigeration and air conditioning systems be planned, built, and operated in a future-proof and cost-efficient manner in times of constantly tightening environmental legislation?

  • 2211
    2019

    GEA supports MAN with new separator in the development of a game changer

    With the help of a system partnership, two game changers in their respective areas develop into a large, joint solution.

  • 2111
    2019

    LEFF® technology from GEA saves up to 90 percent on cleaning media

    The LEFF® technology in GEA VARIVENT® Mixproof Valves provides up to 90 percent savings in clean-in-place media (CIP) such as expensive cleaning agents, water and waste water.

  • 2111
    2019

    GEA completes additional measure to optimize the Business Area Solutions

    In November, GEA sold de Klokslag to Evert IJntema and Jan Dijkema. De Klokslag, which is one of Europe’s leading manufacturers of large-scale plants for hard and semi hard cheese, has roughly 80 employees and, according to the latest figures, generates an annual revenue of around EUR 15 million.

  • 2011
    2019

    GEA improves shelf life of beverages and dairy products with the D-tec® double-chamber valve D/DV

    Gea completes its D-tec valve range with the double-chamber valve D/DV.

  • 2011
    2019

    GEA: Using IO-Link for T.VIS® to access real-time data

    Real-time diagnostics of data or direct access to sensor data specifically during valve setup and maintenance improves control, accelerates product changes, can anticipate problems before they escalate, calculates plant effectiveness, identifies performance trends, and optimizes maintenance schedules.

  • 1911
    2019

    Dependable Performance from GEA’s Newest Rotary Tablet Press

    Benefiting from a very small footprint for a high-output commercial-scale machine, the PERFORMA D offers a market-leading size-to-output ratio in terms of both cost and square meterage per tablet.

  • 1511
    2019

    New OC200 modular orbital cleaner from GEA: efficient cleaning technology for large hygienic tanks

    GEA is presenting a new modular orbital cleaner at BrauBeviale 2019 in Nuremberg (November 12 to 14, 2019).

  • 1411
    2019

    GEA adds twin screw pump GEA Hilge NOVATWIN to its range of pumps

    The pump experts from GEA and ITT Bornemann are now working together to manufacture and market a twin screw pump for the food, beverage and pharmaceutical industries. While GEA has so far concentrated primarily on hygienic centrifugal pumps, the cooperation now means that a joint model of a positive displacement pump is ready for introduction: GEA Hilge NOVATWIN. The GEA Hilge NOVATWIN is a flexible twin screw pump based on the proven Bornemann design that meets the highest hygienic requirements for gentle product handling and clean-in-place (CIP) with just one pump. The new GEA Hilge NOVATWIN will be available in 6 sizes and will be part of the GEA VARIPUMP line, which stands for pumps with a high degree of flexibility for optimum adaptation to individual customer requirements.

  • 1311
    2019

    GEA showcases new GEA brewpub skid for micro-breweries at BrauBeviale

    At BrauBeviale, GEA will premiere the new GEA brewpub Separator Skid, developed especially for tavern and pub micro-breweries that produce on site. With this essential skid, small brewpubs now get access to GEA’s state-of the-art centrifuge technology at an attractive starter price. The machine comes as a ready-to-plug skid to immediately deliver all the key benefits of beer clarification with a centrifuge: Reproducible quality, optimal dry hopping and decreased production time, meaning more batches in the same time.

  • 1211
    2019

    GoingConti in the Virtual World

    Based on positive user feedback and their ongoing mission to expedite the implementation of continuous pharmaceutical processing, GEA will offer its virtual conti experience at both Pharmtech Moscow and P-MEC India.

  • 1111
    2019

    A taste close to the original

    After successful commissioning and targeted optimization runs of the GEA AromaPlus dealcoholization unit in August and September this year, the privately-owned brewery Kaiserdom in Bamberg/Germany is looking forward to the sales launch of the new Kaiserdom Hefeweißbier 0.0% in November 2019. The innovative reverse osmosis unit of the GEA technology group convinces with the high quality and characteristic taste of the completely dealcoholized wheat beer.

  • 1111
    2019

    GEA shows complete process integration for plant-based beverages at BrauBeviale 2019

    Alongside its focus on brewing at BrauBeviale, GEA will also address other beverage industry trends at the trade show in Nuremberg. Among them, GEA’s 360-degree solutions for producing plant-based beverages. Bean- and cereal-based convenience products, such as drinks, have gained popularity all over the globe, riding high on health- and environment-conscious dietary trends. “The vegetarian segment is a key focal area for development at GEA. Demand is high around the world and GEA’s extensive project experience and technology portfolio allow us to support customers every step of the way, through to service in ongoing operations,” says Colm O’Gorman, GEA Business Manager Plant-Based Beverages.

  • 0811
    2019

    Störtebeker Craft Brewery turns to GEA’s innovative technology for the cold extraction of hop oils

    Störtebeker Craft Brewery in the city of Stralsund is GEA’s first customer in Germany to use the GEA HOPSTAR® Dry for the dynamic cold extraction of hop oils. Early in 2019, the two companies signed a contract to build, install and commission GEA’s system; the work was successfully completed the following August. Now the beers Störtebeker makes with high pellet loads come out even more homogeneous using fully automated, stabilized processes.

  • 0711
    2019

    New GEA nitrogen freezing pilot plant for bacteria allows for process testing before investing

    GEA has launched its new nitrogen freezing pilot plant for bacteria, giving food and dairy processors the opportunity to trial this new technology in their own plants before investing in production-scale equipment. By freezing bacteria into pellets before drying, GEA is now able to provide processors with greater flexibility, a higher active cell count and reduced costs through better utilization of their fermentation lines and freeze dryers.

  • 0711
    2019

    Helmut Korthöber named Chief Service Officer of GEA Farm Technologies division

    The new three-member Management Board of the GEA Farm Technologies division have all officially been appointed: Peter Lauwers will transfer from Atlas Copco to GEA on February 1, 2020, and assume the position of CEO. He will be joined by Helmut Korthöber, who assumed the newly created position of Chief Service Officer (CSO) for GEA Farm Technologies division as of November 1, 2019. Erkul Basaran, who has worked successfully for GEA for more than eight years – most recently as Head of Finance – was appointed CFO of the division already in September of this year.

  • 0611
    2019

    Service trends: How will the beverage industry produce in the future?

    How will beverage and food manufacturers be producing in the future and what optimization potential do digital services offer in terms of product quality, variety, flexibility, efficiency, availability and sustainability? Visitors to this year's BrauBeviale in Nuremberg, will be able to find out by visiting the GEA booth, where new products for the beverage industry as well as GEA’s service solutions will be on display.

  • 0611
    2019

    First in Scandinavia: Finnish brewery selects GEA AromaPlus Membrane Dealcoholization Unit for alcohol-free beer

    There are several different methods for producing dealcoholized or non-alcoholic beer. Laitilan Wirvoitusjuomatehdas Oy brewery in Finland knew it wanted to avoid wort-like flavors and achieve the best results when it came to taste and quality. Retaining the genuine flavor and original features of their Laitilan Kukko beer were the key criteria when they chose the membrane filtration system, AromaPlus, from GEA.

  • 3010
    2019

    GEA Bock StarCO2mpressor wins Busworld Innovation Label Award 2019

    The decision has been made: The GEA Bock StarCO2mpressor, the new generation of mobile CO2 compressors for electric bus and railway air conditioning and heating, was awarded the coveted Busworld Innovation Label Award 2019 at the world's largest bus trade fair in Brussels.

  • 2510
    2019

    GEA posts increase in order intake and revenue in the third quarter, raising 2019 revenue outlook slightly

    Technology group GEA posted an increase in both order intake and revenue in the third quarter of 2019. Order intake rose to EUR 1.25 billion in the last quarter, an increase of around 5 percent compared to the same quarter in 2018. Both basic business and six large projects (three of which were awarded in dairy processing) contributed to this positive development.

  • 2310
    2019

    There’s nothing fresher: New GEA vaculiq delivers gentle vacuum juicing

    Refreshingly different: It’s not only GEA’s motto for the upcoming Brau Beviale in Nuremberg, but also the philosophy behind the new GEA vaculiq Vacuum Spiral Filter, which debuts at the fair November 12-14. GEA vaculiq, which requires minimal space, efficiently juices diverse fruits and vegetables while under vacuum pressure. This method protects valuable plant nutrients and vitamins, ensuring fresh flavors and healthy ingredients are preserved from atmospheric oxygen.

  • 1710
    2019

    Johannes Giloth appointed to GEA’s Executive Board

    The Supervisory Board of GEA Group Aktiengesellschaft has appointed Johannes Giloth (49) to the company’s Executive Board with effect from January 20, 2020, where he will assume responsibility for the newly created Procurement, Production and Logistics organization.

  • 1510
    2019

    GEA explores possible sale of compressor supplier GEA Bock

    Düsseldorf-based technology group GEA is exploring a possible sale of GEA Bock as part of the Group’s continued focus on its strategic core markets – the food, chemical and pharmaceutical industries. As announced at the Capital Markets Day in September, GEA plans to divest selected activities of the future Farm Technologies and Refrigeration Technologies divisions in this connection.

  • 1510
    2019

    Fi Europe 2019: GEA to showcase its technology strengths in food processing and safety

    At the leading trade show for food ingredients, Fi Europe, taking place in Paris, France, December 3-5, GEA will showcase its solutions for the manufacture of food and dairy ingredients, freeze-dried foods and instant coffee at booth 6F141 in hall H6

  • 0710
    2019

    GEA’s multi-functional Visitron Filler ALL-IN-ONE on its way to Australia

    Smart solution from GEA reduces time for reconfiguring complex filling equipment and format changeover

  • 0210
    2019

    GEA presents new generation of CO2 mobile compressors for air conditioning and heating

    With the GEA StarCO2mpressor, GEA is presenting a new milestone for mobile CO2 applications at this year’s Busworld in Brussels from October 18-23, 2019.

  • 309
    2019

    New flexible cubicle GEA DairyBarn B3130 for optimum cow comfort

    GEA now launched its new flexible cubicle GEA DairyBarn B3130 for dairy cows which enlarges cow comfort and maximizes the milk yield. It allows that animals can lie down and stand up with ease, with maximum safety thanks to its exclusive design. This results in healthy and rested cows which are essential for productivity and profitability in the dairy farm.

  • 269
    2019

    Capital Markets Day 2019: GEA unveils further measures to increase earnings and focuses on growth in all divisions

    Technology group GEA will today present new medium-term targets for the entire Group and its five future divisions at the Capital Markets Day. The Group plans that consolidated revenues will grow by an average of 2.0–3.0 percent per year until 2022.

  • 129
    2019

    GEA shows excellence at every stage in the food production process at Gulfood Manufacturing in Dubai

    GEA will present their process expertise, technology leadership and customer-centric services for a wide range of food processing industries at this year’s Gulfood Manufacturing fair in Dubai from October 29 – 31, at booth D1-64, A1-64 in hall 1.

  • 308
    2019

    GEA steps out in refreshingly different style at BrauBeviale 2019

    Refreshingly different: The GEA presentation at BrauBeviale from November 12–14, 2019 in Nuremberg (GEA booth in Hall 7/7-600) aims to surprise with a fresh take.

  • 228
    2019

    Transcritical CO2 refrigeration technology from GEA makes waves in global marine refrigeration business

    Due to national and international laws as well as voluntary environmental protection measures, more and more environmentally friendly refrigerants are being used in the marine business.

  • 128
    2019

    GEA kicks off third quarter with several major orders

    Technology group GEA acquired several major orders from various industries at the start of the third quarter, making up substantial ground after sluggish order intake from project business in the previous quarter.

  • 068
    2019

    GEA closes second quarter of 2019 with strong revenue and stands by outlook for year

    GEA Group Aktiengesellschaft is standing by its business outlook for 2019, despite various special effects having a negative impact on earnings in the second quarter of the year.

  • 058
    2019

    Pavan integrates Montoni under its umbrella brand

    From September 2019 the well-known Montoni brand, manufacturer of dies, extrusion molds and cutting systems, will continue its operations within the “Dies & Moulds Business Line” under the umbrella brand of Pavan.

  • 018
    2019

    GEA optimizes TwinTube packaging machine to promote flexibility and automation

    GEA will launch the redesigned high-speed vertical packaging machine GEA SmartPacker TwinTube at PACK EXPO (booth LS-5905) in Las Vegas, USA from September 23-25, 2019. The entire machine has been redesigned as a future-proof modular system with increased functional efficiency promoting higher operational uptime and ease of use.

  • 018
    2019

    GEA and Danaos Shipping cooperate on further development of separators - Installation of GEA marine Separator 35 on container ship ZIM LUANDA

    Mile by mile better and more efficient: With the new GEA marine Separator 35 GEA supports its long-standing customer and partner Danaos Shipping, Greece.

  • 307
    2019

    100th GEA environmental Decanter pro for sludge treatment from the Tianjin plant

    The demand for decanters for sludge treatment is high. GEA has now produced the 100th GEA environmental Decanter pro at its plant in Tianjin, China and delivered it to the operator of a regional wastewater treatment plant. The production facility in Tianjin was opened in 2013 and is a multi-purpose site designed to manufacture products from various GEA divisions, as well as a certified repair shop.

  • 117
    2019

    New GEA marine Separator proves itself in the market

    GEA equipped two Hapag-Lloyd container ships with the GEA marine Separator which it recently presented at SMM 2018 in Hamburg.

  • 097
    2019

    IBIE: GEA bakery lines built to perform, built to last

    Under the motto “100 years of combined passion and know-how,” GEA will be exhibiting advanced bakery technology from its leading brands, GEA Comas and GEA Imaforni, at the International Baking Industry Exposition (IBIE) in Las Vegas from September 8-11, 2019. Both processing and freezing technology will be represented at booth 7547 to demonstrate the company’s innovation, craftsmanship, partnership and know-how in creating bakery lines that are built to perform and built to last.

  • 027
    2019

    No more frost with new upgrade for GEA A-Tec spiral freezers

    The new GEA Static Pressure Control System (SPCS) is GEAs most recent service upgrade for older A-Tec spiral freezers. The simple upgrade instantly controls the air flow, reducing frost build-up which increases productivity and improves product quality. Saving time, energy, money and a four-month ROI are further advantages of the new SPCS.

  • 017
    2019

    New Fast Lane Service for GEA separators significantly shortens repair times

    Following a series of optimization measures at its Center of Excellence (COE) in Oelde, GEA has already began significantly reducing the general repair times of its separators by up to 40% worldwide. For particularly urgent cases, GEA is now offering a Fast Lane Service, which enables affected separators to be repaired in less than 10 days.

  • 286
    2019

    GEA hosts companies, research partners and start-ups at the “GEA Innovation Forum”

    Leading technology group GEA’s own culture of innovation serves as the key to securing future commercial success and fostering further growth. To this end, GEA invited customers, research partners and select start-ups to its third “GEA Innovation Forum.”

  • 246
    2019

    GEA’s new organization paves way for increased performance

    Technology group GEA has outlined its new organizational structure, which will be implemented gradually from October 1, 2019 onwards and become effective January 1, 2020. Going forward, GEA will be organized in five divisions with each up to six sub-divisions.

  • 216
    2019

    GEA supplies Bracco with falling film evaporator for the concentration of contrast media

    Italian company Bracco in Torviscosa, located in the Udine Province, has placed an order with GEA for the supply of a falling film evaporator.

  • 196
    2019

    Greece goes automated milking!

    With an open-house day and several speakers, GEA’s first automated milking system was installed in Greece. More than 120 customers attended the event and learned about GEA’s capabilities in automatic milking.

  • 196
    2019

    GEA will appeal against verdict of U.S. civil jury court

    On June 17, 2019, a civil jury in the Circuit Court of the Eleventh Judicial Circuit in and for Miami-Dade County, Florida, USA rendered a double-digit-million (U.S.) dollar verdict against GEA Mechanical Equipment US, Inc.

  • 205
    2019

    GEA builds first freeze-dried coffee production plant for Tata Coffee outside of India

    GEA has completed a new freeze-dried instant coffee plant on a green field site in Vietnam for Tata Coffee Vietnam Company Limited, a 100% subsidiary of Tata Coffee Limited, India. According to the timetable for the contract project which was signed two years ago, the new plant was inaugurated on March 6, 2019 – just 19 months after the groundbreaking ceremony.

  • 205
    2019

    Marcus A. Ketter new CFO of GEA

    Marcus A. Ketter (51) today became Chief Financial Officer of GEA Group Aktiengesellschaft. His predecessor Dr. Helmut Schmale (62) left the company on May 17, 2019, after more than 10 years in this position.

  • 105
    2019

    GEA confirms guidance for 2019 and introduces measures to improve earnings in Business Area Solutions

    Düsseldorf-based engineering group GEA posted order intake of around EUR 1.2 billion for the first quarter of 2019, a rise of 7.6 percent.

  • 095
    2019

    GEA CutMaster – Fastest machine to produce high-quality sausages and other innovative food products

    At IFFA in Frankfurt, GEA will be demonstrating its industry expertise and technological know-how in the field of high-tech equipment and line competence in the food industry, including in the application of sausage production. GEA CutMaster, the market leader in terms of speed, is the key machine for producing high quality sausage on an effective way.

  • 085
    2019

    IFFA 2019: GEA boosts uptime of its stand-up bag packaging machine to over 98%

    GEA, one of the largest suppliers for the food processing industry, will launch two innovations in the area vertical packaging to support meat and poultry manufacturers increase uptime and boost consumer confidence at IFFA 2019 – held in Frankfurt from 4-9 May. GEA’s SmartPacker CX400 packaging machine, available in both sanitary and standard configurations, is now equipped with induction sealing capabilities that reduce changeover times to less than two minutes.

  • 075
    2019

    FoodTray at IFFA – New system solution for sustainable MAP packaging

    GEA presents a new combined solution for sustainable food packaging at IFFA in Frankfurt.

  • 075
    2019

    IFFA 2019: Maximizing quality and minimizing costs with fully automated production lines

    Under the motto ‘Excellence at Every Stage’, GEA will present its equipment and solutions for diverse application areas at this year’s IFFA in Frankfurt, Germany. Key processing and packaging exhibits will demonstrate the benefits of automation; optimal process control; as well as the efficient use of resources, energy and labor in meat manufacturing.

  • 065
    2019

    GEA introduces a cloud-based open service portal

    At the IFFA trade fair in Frankfurt (Germany), GEA will showcase a new cloud-based platform for digital services for the first time. This supplier-independent portal provides customers modern service solutions like remote maintenance, data analysis and comprehensive e-Commerce and enables them to seamlessly integrate all their supplier interactions in one common platform.

  • 025
    2019

    GEA Toolings provide greater flexibility and advanced performance

    For its packaging and forming machines as well as grinding and cutting equipment, GEA developed different Toolings to make sure the machines always fulfill their demands. Whether it affects the shape, size, taste, quality, or safety and economic needs for the end product, GEA Toolings bring the latest innovations and developments to meet all those new requirements.

  • 304
    2019

    GEA’s new aseptic double-seat valve increases shelf life of beverages and dairy products

    GEA is launching its new D-tec® D/DV double-chamber valve by end of April 2019. The outstanding sealing properties of the new valve stem diaphragm raise hygiene standards to an UltraClean level, thus increasing the shelf life of soft drinks, fruit juices, as well as milk-based and lactic acid-fermented products.

  • 304
    2019

    GEA delivers energy savings with award-winning continuous freezer control system

    Successful test measurement in french fries production at Bergia Frites in the Netherlands

  • 294
    2019

    New GEA Service Kits enable convenient and preventive maintenance

    With the new GEA Service Kit concept for both packaging and forming machines, maintenance is now more convenient and even easier to plan.

  • 254
    2019

    Dr. Rudolf Michel, Head of Application Development Beverages & Beer at GEA, assumes chairmanship of the Board of Trustees at Doemens

    After being a member of the Board of Trustees at the Doemens Academy for many years, Rudolf Michel was elected Chairman in February 2019.

  • 164
    2019

    On the safe side with GEA CatFineMaster

    The fine-grained, hard, brittle and highly abrasive catalyst residues in fuels, known as cat fines, can cause considerable damage to marine engines.

  • 154
    2019

    ProPak Asia – GEA presents its CALLIFREEZE® control system for the S-Tec spiral freezer

    GEA will make its first debut at ProPak Asia in Bangkok in June 2019. The company will demonstrate its market-leading technology for the food ingredients, beverage, bakery, meat, poultry and ready-to-eat meals sectors and introduce its CALLIFREEZE® system for the GEA S-Tec spiral freezer to the Asian market. From June 12-15, the ProPak Asia booth (Hall103/BS41) will showcase a range of bakery products and freeze-dried samples, all produced on GEA equipment.

  • 124
    2019

    GEA to supply thomas zement turnkey plant for the reduction of NOx in flue gas

    GEA has received an order from thomas zement for a turnkey plant for the reduction of NOx in flue gas.

  • 104
    2019

    Powerful Change in Powder Compaction

    From nuclear fuel pellets, hard metals and batteries to confectionery, almost anything is possible with the R55 industrial rotary press.

  • 094
    2019

    GEA Rotary Atomizers for spray dryers: upgrade allows excellent dispersion

    Excellent hardware is one thing – valuable service another. That’s why GEA also presented its customized service solutions for its broad spectrum of technologies, machines and plants for processing solids and liquids at this year’s POWTECH trade show in Nuremberg.

  • 094
    2019

    Successful GEA PowerPak training for Mondi staff

    To improve their customer service, eight engineers from Mondi Styria, the flexible film producer in Austria, recently participated in a GEA PowerPak training in Wallau, Germany. Mondi Styria’s know-how is based on more than 60 years of experience in the field of plastics processing.

  • 084
    2019

    “More horsepower under the hood:”GEA doubles the drive power of its GEA Hilge HYGIA hygienic pump

    GEA supplements its GEA Hilge HYGIA range with a 45 kilowatt motor, thereby expanding the hygienic pump’s performance spectrum to a flow rate of 180 cubic meters per hour. The new version is also suitable for demanding pharmaceutical applications, particularly because the use of high-quality, no-cast materials in CIP- and SIP-capable special pumps is a critical factor in the production of life science products. GEA will introduce the new drive version at POWTECH 2019 in Nuremberg, which focuses primarily on mechanical process engineering for the chemical and pharmaceutical industries (April 9-11, 2019, Hall 3/3-231).

  • 084
    2019

    GEA celebrates craft brewing culture in the Mile High City: CBC 2019

    Denver, Colorado, is hosting this year’s U.S. Craft Brewers Conference (CBC). The Brewers Association expects to have more than 13,000 professionals from the brewing industry attend its diverse seminar program and BrewExpo America trade show ¬– all taking place against the backdrop of the Rocky Mountains. GEA will, once again, be in attendance. This year, the company will showcase its brewing and filling expertise and present their specialized technologies for forward thinking craft brewers. (April 8-11, 2019, GEA stand 12003).

  • 044
    2019

    GEA VIPOLL’s ALL IN ONE monoblock filler receives two Packaging Awards of Excellence in Australia

    At its AUSPACK conference on March 27, 2019, the Australian Packaging and Processing Machinery Association (APPMA) selected the best packaging innovations and products of the year.

  • 213
    2019

    GEA supports Albemarle with technologies for all process steps in lithium recovery

    For the first time in a lithium extraction project, Australia leaves all process steps from ore mining and separation to refining in the country. With its comprehensive technology portfolio, GEA is supporting its customer Albemarle, in this project.

  • 193
    2019

    GEA signs contract to build the largest Olive Oil mill in Asia

    GEA received the order from The National Agricultural Development Company (NADEC) in March 2019 to build and supply the industrial equipment for a large olive oil mill located in Saudi Arabia.

  • 143
    2019

    GEA presents 2018 results and set of measures to sustainably strengthen profitability

    Technology group GEA has announced its definitive figures for fiscal 2018. In addition, Stefan Klebert, GEA’s new CEO, presented his analysis of the status quo and outlined the immediate action the company will take.

  • 133
    2019

    Niels Erik Olsen leaves GEA’s Executive Board

    Today, the Supervisory Board of GEA Group Aktiengesellschaft and Niels Erik Olsen (52), member of GEA’s Executive Board responsible for the Business Area Solutions, have agreed on an early termination of his service agreement, which is due to expire on December 31, 2021.

  • 113
    2019

    Craft brewer Gipsy Hill Brewing to accompany GEA at BeerX

    When U.K. brewers meet at BeerX in Liverpool (March 13-14, 2019), they will not only get an up-close and personal view of GEA Plug & Win separator skid at the GEA stand 141, but will also have the opportunity to speak to London-based craft brewers Gipsy Hill Brewing Company about working with this user-friendly centrifuge, where it has been in operation since 2018, delivering top performance. GEA brewing experts will be on hand to provide information on both brewing and filling solutions for craft beers in the hot and cold process. Naturally, samples of the popular Gipsy Hill beers will also be available for tasting.

  • 073
    2019

    New GEA marine Separator convinces the market - first orders received

    The new GEA marine Separator met with great interest at the world's leading trade fair SMM in September 2018 in Hamburg. The first contracts for orders have now been signed.

  • 272
    2019

    GEA introduces benefits of cutting-edge technology and in-depth process expertise to meat manufacturers at IFFA 2019

    From May 4 to 9 at IFFA, Frankfurt (Germany) GEA will present their process expertise, technology leadership and customer-centric services for the meat industry under the motto ‘Excellence at Every Stage’. The technology leader will be exhibiting at booth D06 in hall 8 and focus on four main application areas that link back to this year’s theme, specifically: tempura-coated and homestyle coated products, the art of bacon making and sausage.

  • 212
    2019

    GEA introduces MultiJector 2mm – a new injection system for brining bacon and poultry

    The new brine injection system is part of GEA MultiJector product family and is specifically dedicated to precise bacon and poultry processing, for 700 mm wide lines. The system features two millimeters OptiFlex needles, to date unique by GEA, promoting a tight injection pattern and allowing for exceptional injection accuracy, product quality and consistency.

  • 202
    2019

    GEA premieres its PowerPak PLUS thermoforming packaging machine

    Greater process reliability and reduced resource consumption during the packaging of fresh products – both are guaranteed with the latest generation of GEA thermoforming packaging technology, the GEA PowerPak PLUS. The machine was presented for the first time during, the GEA Packaging Days customer event at the production site in Wallau, Germany, at the end of last year. In May, the technology group will use e the international trade fair IFFA in Frankfurt (Hall 8/Stand D06) to showcase the system on a larger scale.

  • 182
    2019

    Stefan Klebert assumes the post of CEO of GEA today

    Today, Stefan Klebert (53) became chairman of the Executive Board of the GEA Group Aktiengesellschaft, a body that he joined on November 15, 2018. His predecessor, Jürg Oleas (61), has left the company, as planned, after spending more than 14 years as head of the Group.

  • 122
    2019

    Marcus A. Ketter appointed new Chief Financial Officer of GEA

    The Supervisory Board of GEA Group Aktiengesellschaft has appointed Marcus A. Ketter (50) to the company’s Executive Board with effect from May 20, 2019. He is set to succeed the long-standing Chief Financial Officer, Dr. Helmut Schmale (62), who will leave the company as of May 17, 2019.

  • 062
    2019
  • 311
    2019

    GEA to build the largest infant formula plant in China for Junlebao Dairy

    In September 2018, GEA secured an order from the Shijiazhuang Junlebao Dairy Co. Ltd. in China to supply the country’s largest spray dryer for the manufacture of infant milk formula (IMF), with a planned production capacity of 6 tons/hour.

  • 301
    2019

    BisCat – ceramic catalyst filter

    GEA has developed high-temperature filters with ceramic elements that enable the removal of NOx, dioxins, mercury and VOC through an integrated catalyst matrix. BisCat ceramic catalyst filters are chemically inert and corrosion-resistant. This means that for many applications only one single system is required instead of three.

  • 241
    2019

    GEA finalized delivery to Borregaard of key components for turnkey process solution for the production of bio-based products

    The production of value-added products from renewable raw materials is Borregaard's strategy. GEA is supporting its customer with the supply of a turnkey plant for the spray drying of lignosulfonate in the double-digit million range.

  • 211
    2019

    GEA launches new 6-cylinder compressor HG66e

    GEA presents the HG66e, a new semi-hermetic compressor. The HG66e is a completely new 6-cylinder series for large capacities with high efficiency in the fields of air conditioning and refrigeration.

  • 181
    2019

    GEA shows innovative solutions at press preview at POWTECH 2019 in Nuremberg, Germany

    At the press preview of the POWTECH trade show on Wednesday, January 16, 2019 in Nuremberg, GEA presented its know-how with a broad spectrum of technologies and solutions for processing solids and liquids for various industries and applications such as food, animal feed, pharmaceuticals, chemicals, ceramics, minerals, hard metals, battery materials and basic materials for high-quality plastics.

  • 181
    2019

    New era for emulsion homogenization: Field study shows transparent emulsion results with GEA NiSoX-Valve

    Successful completion of testing at GEA customer site demonstrates that the GEA NiSo-Valve homogenizes nanoemulsions quicker and more flexibly.

  • 151
    2019

    GEA DairyRobot R9500 – New milking robot enhances milking process

    High-quality milk production and superior herd management are essential for a successful dairy operation. The new box-style robot from GEA, the DairyRobot R9500, is engineered to enhance the milking process and increase on-farm efficiency.