The ECM Concept: Exchangeable Compression Module
The Exchangeable Compression Module (ECM) is the unique, distinctive feature that sets the MODUL tablet press apart.
The Exchangeable Compression Module (ECM) is the unique, distinctive feature that sets the MODUL tablet press apart. The patented ECM is a tremendous improvement on the exchangeable turret concept and offers very high containment with incomparable productivity and flexibility for tablet compression. Much more than a conventional exchangeable die table, the ECM is a sealed unit that’s isolated from the remainder of the tablet press and not only contains the turret and compression tooling, but all the press’s product-contact parts as well.
At the end of a production run, the ECM can be removed from the machine in just 15 minutes. No machine cleaning is required, as all product contact parts and powder residues are encapsulated in and removed with the ECM; the inside and outside of the press are left perfectly clean. A duplicate, clean ECM can then installed in the machine in another 15 minutes.
Providing both operator and product safety, the ECM can be easily removed and exchanged with a replacement unit in just 30 minutes for fast product changeover and the complete line can be back in full production in less than one hour. Offering easy cleaning, high productivity and removing any risk of cross-contamination, this extremely short changeover time results in unmatched productivity and flexibility for tablet production.
The standard ECM provides a closed environment that ensures contamination levels outside the machine remain below 10 μg/m3. This is ideally suited for non-potent pharmaceutical applications in which a dust-tight seal provides adequate protection when the doors of the press are opened. The ECM can then be safely removed for cleaning in a designated area, usually with a simple air hose. There is no further need to clean the inside of the press or the room in which it operates.
The WOL ECM has been specifically designed for tableting operations using highly potent APIs to keep operators safe from harmful compounds, without the use of cumbersome air suits, and to prevent cross-contamination. The WOL ECM maintains the concentration of harmful APIs in the environment around the tablet press below 1μg/m3.
The table below shows which ECM types are available for each model (MODUL P, MODUL S).
MODUL P | MODUL S | |
C-ECM | x | x |
HC-ECM | x | x |
WOL-ECM | x | x |
BL-ECM | x |
The WOL ECM has been specifically designed for tableting operations using highly potent APIs to keep operators safe from harmful compounds, without the use of cumbersome air suits, and to prevent cross-contamination. The WOL ECM maintains the concentration of harmful APIs in the environment around the tablet press below 1μg/m3.
Made from corrosion-resistant materials, the WOL ECM can be removed from the press and washed separately, using strong detergents, without any risk of damage. Washing takes place in a sealed environment using a special wash skid that avoids the need to open the ECM or remove any components (such as punches) and uses the minimum amount of water and detergent. The WOL ECM can be opened for final manual rinsing and drying without any risk of toxic material becoming airborne. All electrical components, or components that cannot be constructed from suitably corrosion resistant materials, such as cams and bearings, are kept outside the confines of the ECM so do not require cleaning.
The fast product changeover time of just 30 minutes is particularly significant for high containment operations as the same operation on a standard isolator-based system can take up to 16 hours.
MODUL P 'ECM' technology with advanced dual control for R&D and small to medium production for single & bi-layer tableting, ideally suited for formulation development, clinical trial production and small-batch / multi-product production.
Thanks to the ECM (Exchangeable Compression Module), the MODUL S for medium-volume tablet production enables extremely fast change-over and offers unparalleled operator protection. All product contact parts are contained in an ISOLATED DUST-TIGHT module, which can be disconnected and removed from the machine in a contained manner, leaving the tab...
The MODUL D is the most sophisticated double-output / bi-layer rotary tablet press available on the market and features the patented MODUL Exchangeable Compression Module (ECM) technology.
Featuring an innovative design that promotes operator (and environmental) safety and ease of use, the NexGen Press® range is modular, intuitive and cost-effective to run, combining unrivaled containment with fast product changeovers and the best price-performance tableting system..
質の高いコールドチェーン管理の重要性を過小評価することはできません。傷みやすい生鮮食品が消費地で安全かつ高品質であることを保証することは、コールドチェーン施設を運営する人々にとって非常に大きな責任です。GEAは、低温貯蔵や配送センター向けに安全で持続可能な冷凍技術を提供する最前線に立ち、お客様の施設のエネルギー消費量と二酸化炭素排出量の削減を支援しています。
自動搾乳における最新の進化は、バッチ搾乳を導入することです。バッチ搾乳とは、通常1日に2~3回、決まった搾乳時間に乳牛をグループ分けして搾乳する酪農方法です。自動化技術は、酪農場における乳牛の福祉、柔軟性、そして持続可能性のバランスを取りつつ、それと同時にコスト構造を継続的に最適化し、より効率的になるという、酪農家の最近の課題を克服するのに役立っています。
多数の国では、安全な水と衛生設備を確保することがいまだに課題となっています。汚れの混じった飲用水により病気になったり、毎日水を汲みに行くという役割を果たすため、学校に通うことができない子供たちが多数存在します。ドイツのハンブルクを拠点とする非営利団体Viva con Aguaと協力することで、GEAは一部のタンザニアの学校にきれいな水を供給する手助けをしています。