The T.VIS® E-20 is specially designed to meet the requirements of the liquid processing industry as well as dust explosion protection. In addition, all components of this control top are standardized to the utmost degree. This ensures the simplest and most time-saving handling with high reliability and safety. The technology of the T.VIS® E-20 is based on two separate, magnet-based sensors combined in one sensor module. They are used to detect the valve position and provide the corresponding feedback signals for automated plant operation. The sensor module also provides the optional connection for the pilot solenoid valves to control the valve actuators.
The T.VIS® E-20 has 2 position sensors integrated in a compact module as standard. The LEDs, which are also integrated, enable status identification by means of the illuminated dome incorporated in the control top cap. The required cabling by the customer to the necessary operating equipment and therefore ensuring the intrinsically safe operation of the control top is achieved by direct wiring to internal spring-loaded terminals, both for the feedback signals and for the valve activations. The supply air connection is equipped with a replaceable filter to protect the built-in solenoid valves.
Two manually adjustable sensors for detection of the valve positions for start/safety and end position.
The sensors are mounted on guide blocks and can be individually adjusted over the entire stroke of the valve via two threaded spindles integrated in the sensor module.
LED display
Approved for use in the following applications:
Type of conformity | ATEX/UKEX/IECEx/CCCEx |
Application | |
Gas | (II 2G) Ex ia IIC T4…T5 Gb |
Ambient temperature | -10 °C ≤ Ta ≤ +42 °C |
Dust | (II 2D) Ex tb IIIC T85 °C Db |
Ambient temperature | -10 °C ≤ Ta ≤ +38 °C |
All certifications are based on use in gas and dust atmospheres, covering the requirements for equipment category 2 (EPL b).
Technical data of the standard version | ||
Position detection | Magnetoresistive proximity switches | |
Housing material | PA 12/L | |
Air supply | Pressure range | 2 to 8 bar |
Standard | acc. to ISO 8573-1:2010 | |
Solid content | Quality class 6 | |
Water content | Quality class 4 | |
Oil content | Quality class 3 | |
Dimensions of air connections | Metric 6/4 mm, inch 6.35/4.31 mm (¼") | |
Protection class | IP 69 | |
Sound pressure level
via exhaust air throttle | Max. 72 dB | |
Visualization | LED (green, yellow) | |
Certificates | ATEX, IECEx, UKEx, CCCEx |
高精度な経路測定システムを備えた T.VIS® A-15 は、T.VIS® 制御トップに装備可能な GEA のどのバルブでも、開 / 閉位置を自動で認識できます。
コントロールトップ GEA T.VIS®M-20 は、大部分のアプリケーションポイントで必要とされる最新の制御機能全域を提供するとともに、自動バルブの試運転と効率的な機器管理の観点で追加の利点を提供します。
T.VIS® P-15 は、空気圧プロセスバルブ用のコンパクトな位置制御装置です。位置は位置センサーによって検出され、2 つの統合されたソレノイドバルブによって調整されます。
接続 0、INA、LAT
質の高いコールドチェーン管理の重要性を過小評価することはできません。傷みやすい生鮮食品が消費地で安全かつ高品質であることを保証することは、コールドチェーン施設を運営する人々にとって非常に大きな責任です。GEAは、低温貯蔵や配送センター向けに安全で持続可能な冷凍技術を提供する最前線に立ち、お客様の施設のエネルギー消費量と二酸化炭素排出量の削減を支援しています。
自動搾乳における最新の進化は、バッチ搾乳を導入することです。バッチ搾乳とは、通常1日に2~3回、決まった搾乳時間に乳牛をグループ分けして搾乳する酪農方法です。自動化技術は、酪農場における乳牛の福祉、柔軟性、そして持続可能性のバランスを取りつつ、それと同時にコスト構造を継続的に最適化し、より効率的になるという、酪農家の最近の課題を克服するのに役立っています。
多数の国では、安全な水と衛生設備を確保することがいまだに課題となっています。汚れの混じった飲用水により病気になったり、毎日水を汲みに行くという役割を果たすため、学校に通うことができない子供たちが多数存在します。ドイツのハンブルクを拠点とする非営利団体Viva con Aguaと協力することで、GEAは一部のタンザニアの学校にきれいな水を供給する手助けをしています。