Tank Cleaning Equipment Accessories Cleaning Devices

Accessories for Cleaning Devices

Cleaning Lances

Cleaning Lance
Cleaning Lance

There are three different versions of cleaning lances available:

  • Cleaning lances with or prepared for a static cleaner (spray-ball)
  • Cleaning lances with or prepared for a rotating cleaner
  • Cleaning lances with or prepared for an orbital cleaner

Remark:
Tank dimensions, tank design and the intended use of the tank must be taken into consideration for the determination of the spray ball type, installation depths and clearance.

Material: 1.4404/316L

Protection Cage for Orbital Cleaners

Protection Cage
Protection Cage
From now on the orbital cleaners Typhoon, Tempest and Tornado are available with the new protection cage as an option. This protection cage helps to prevent nozzle damages caused by inserting and removing the cleaners into or from vessels. Due to the special design there are demonstrably no shadow areas while cleaning.
 

Dirt Arrester for Cleaning Devices

Dirt Arrester
Dirt Arrester

GEA recommends installing the dirt arrester in the CIP supply line close to the tank washer to protect it against particulate blocking or damage. Consequently downtimes of the cleaning devices can be avoided.

Nominal sizes
DN 25 / G1" BSP
DN 50 / G2" BSP
DN 80 / G3" BSP

Connection: G-G DIN 11851
Filter gauze: 0,5 mm
Material: 1.4404

Mobile / Stationary Trestle for Cleaners

Mobile Trestle
Mobile Trestle
A mobile or stationary trestle is available for our cleaners 1" or 11/2" connection.

Hose Reel

The hose reel is intended for the cleaning of tanks and vessels. The cleaner fitted to the hose can be lowered into a container. The hose reel has been designed for operation with clean water at max. 10 bar and max. 80°C. The maximum length of the hose is 25 m for 1, 1½ and 2 inches.