业务新闻

New patent reinforces GEA’s leading position in spray dryers designed for 24/7 continuous operation with multiple feed systems

10 Feb 2021

GEA has recently been awarded an exclusive patent for its GEA Clean Purge system for food and dairy spray dryers.

Illustration of the behavior of GEA Clean Purge compared with other, conventional solutions. (Pic. GEA)

Illustration of the behavior of GEA Clean Purge compared with other, conventional solutions. (Pic. GEA)

The patent covers the process of purging feed nozzles while swapping feed systems to ensure continuous feed product to the spray dryer. In practice, this patent grants GEA exclusivity to supply dairy and food spray dryers that can operate continuously at the highest level of safety and efficiency with feed line swaps.

GEA Clean Purge is a significant safety and efficiency enhancement given it addresses the primary cause of fire and explosions in spray dryers while offering significant and valuable product and operational savings to GEA customers. The system has already delivered significant benefits to GEA customers around the world operating high performing powder plants.

Swapping feed lines

Food and dairy dryers can operate continuously by using multiple feed systems – typically two or more feed lines upstream of the spray dryer. This is because the feed lines require regular daily cleaning using a three/four-hour clean-in-place process to prevent undesired bacterial growth and the risk of producing off-spec product.

This requires a spray dryer designed for continuous operation to ensure a smooth and safe swap of the concentrate feed lines without interrupting the process. In turn, this requires a cleaning system that can efficiently purge and atomize the product remaining in the feed lines into the spray dryer to prevent loss of valuable concentrated feed product. The swapping and purging of feedlines is typically fully automated.

When cleaning or purging the retiring feed system, it is vital to ensure that any remaining feed product is pushed out through the spray nozzles and atomized just as efficiently as under normal production; and that the spray nozzles are completely empty after purging. Failure to achieve this can lead to product failures and increase the potential risk of fire or dust explosions. It is GEA’s method of achieving this purging effect and feed line swapping, using GEA Clean Purge, that has been awarded this new patent.

Safety risk

If the retiring spray nozzle lances are not properly emptied before being removed manually by the operator, this can lead to feed product dripping into the spray dryer chamber or depositing on the spray nozzle positioned in the hot air zone of the air disperser. This is a potentially serious safety risk and a well-known cause of fires and explosions in food and dairy spray dryers.

Loss of production efficiency

If the feed concentrate is not correctly atomized during the nozzle purge, it will not dry properly to form powder, but will potentially wet the bottom of the spray dryer, leading to increased deposits and fouling and a significant daily loss of valuable powder. The energy consumed to generate the feed upstream of the spray dryer is also lost. Finally, the increased fouling requires more frequent stops and the use of more water and chemicals.

Exclusive patent covering a range of solutions

Both the increased safety risk and the loss of production efficiency is effectively mitigated by GEA Clean Purge. This is the only fully patented solution that significantly reduces safety risks, representing an important step forward for food and dairy powder production. The patent covers a range of solutions for efficient feed line change over. The uniqueness of GEA Clean Purge is its high-pressure operation that effectively atomizes the feed during the purge. This means that no feed is lost, fouling of the drying chamber is minimized, and the safety risk associated with feed changeover is negligible.

GEA Clean Purge is available on all new dairy spray dryers designed for continuous 24/7 production –or for other applications using nozzle lance change ‘on the fly.’ It can also be easily retrofitted to existing installations.

Plants using GEA Clean Purge, will benefit from significantly improved safety, higher yield, reduced water and chemical usage, reduced plant downtime and higher overall equipment efficiency (OEE). Plant operators will, depending on the application, plant size, and duty, be able to recover the initial investment quickly. The reduced risk of fire and explosion, however, will be realized immediately.

Media Relations

GEA Group Aktiengesellschaft

Peter-Müller-Str. 12


40468

Düsseldorf


Germany

+49 211 9136-0

About GEA

GEA 是食品加工行业及众多工业领域的领先供应商之一,2019 年的销售总额约达 49 亿欧元。

作为国际技术集团,我们专注于机械制造,生产运营,工艺技术及其设备组件。 GEA 为各种终端用户市场的复杂生产流程提供可持续的能源解决方案,并提供全面的服务组合。集团在长期持续增长的食品和饮料行业的收入约占其总收入的 70%。截至 2018 年 12 月 31 日,集团的全球员工已超过 18,500 人。GEA 在其业务领域中是市场和技术领导者。GEA 是德国 MDAX 上市公司(G1A,WKN 660 200),拥有 STOXX® Europe 600 指数和优选的 MSCI 全球可持续发展指数。
接收 GEA 新闻

订阅 GEA 的新闻,掌握 GEA 的创新信息和故事。

联系我们

我们随时为您提供帮助!您只需提供少量详细信息,我们就能回复您的查询。