iNTELFLOW is designed to sense the level of milk in the receiving can via a stainless steel float and the milk pump speed is then adjusted accordingly.
It can be customized to individual installations by adjusting the ramp up and ramp down settings for the various fluid levels; it can also be configured with different settings for wash and milk. This means it can ramp up and down slowly during the milk cycle and rapidly up and down during the wash.
Milk Mode Critical High Time - The time in seconds from the float reaching the top stopper of the float stem before giving an output of 100%.
Milk Mode Critical Low Time - The time in seconds from the float reaching the bottom stopper of the float stem before ramping the pump down to stop.
Milk Mode Minimum Speed - Sets the minimum speed that the pump will operate at in a percentage of pump speed.
Milk Mode Maximum Speed - Sets the maximum speed that the pump will operate at in a percentage of pump speed.
Milk Low to Mid Increase in Speed - Sets the speed at which the pump will start ramping at in a percentage per second of pump speed.
Milk Mid to High Increase in Speed - Sets the speed at which the pump will continue to ramp at in percentage per second of pump speed.
Milk High to Mid Decrease in Speed - Sets the speed at which the pump will start ramping down at in a percentage per second of pump speed.
Milk Mid to Low Decrease in Speed - Sets the speed at which the pump will start ramping down at in a percentage per second of pump speed.
Wash Mode Critical High Time - The time in seconds from the float reaching the top stopper of the float stem before giving an output of 100%.
Wash Mode Critical Low Time - The time in seconds from the float reaching the bottom stopper of the float stem before ramping the pump down to stop.
Wash Mid to High Increase in Speed - The speed at which the pump will start to ramp at in a percentage per second of pump speed.
Wash Mid to Low Decrease in Speed - The speed at which the pump will start to ramp down at in a percentage per second of pump speed.
Network - Yes, automatic initiation of milk, wash and off modes.
Operating Voltage | 12-15V AC |
Controller Output | 4-20mA, 0-5V, 0-10V |
Input Protection | Polarity protected |
Enclosure | 165mmH x 220mmW x 110mmD |
IP Protection | IP55 |
Material | Fully stainless steel / gland nut food grade acetal |
Receiver Hole Size | 20mm required |
Stem Size | 480mmL x 18mmW |
Float Size | 51mmL x 51mmW |
Float Travel | 110mm |
Operating Voltage | 380-500V AC 50/60Hz |
Overload Protection | Yes |
Input Protection | Circuit breaker required |
Output Filtration | Built in RFI filters |
Enclosure | 270mmH x 180mmW x 180mmD |
Weight | 1.35kg |
Input Voltage | 240V AC 50-60HZ |
Output | 12V DC output 1A |
Enclosure | 88mmH x 68mmW x 59mmD |