Tailor made and yet easy to integrate – the flexible solution for efficient processing of crude oil

GEA Crude Oil Treatment System

The GEA Crude Oil Treatment System efficiently dehydrates and desalts crude oil. This modular and robust system is designed to take the quality of crude oil to the highest possible level for further processing, to meet the strict requirements of the oil industry and to efficiently handle potential challenges in various process conditions. The heart of the system is a unit with a high-performance centrifugal separator that can be combined in several ways and can be optionally supplemented by additional functional units.

The global resources of light crude oil are steadily decreasing and the share of both crude oil that becomes heavier and heavier and sources that are more difficult to extract is continuing to grow. Challenges that affect the entire industry and its process chains – from upstream extraction to processing into end products such as fuels, liquefied petroleum gas and petrochemical raw materials in downstream refineries. The demand for crude oil as an energy source will continue to play a major role in the coming decades. Both the growing world population and economic development and the associated increase in prosperity are the basis for the continuously growing demand. Thus, the abundant heavy (“unconventional”) oils, in addition to the challenges they pose, also represent the market’s greatest future growth potential. Therefore it is all the more important to enable stable and economically attractive process control for these oil qualities as well.


Different tasks – one system solution

Thanks to its modular design, the GEA Crude Oil Treatment System can be operated independently or integrated upstream or downstream into the existing overall process.

The following basic process flows can be realized:

  • Installation as upstream dehydration stage to reduce the increasing water content  to below 5 % in order to counteract any impairment of the process performance
  • Parallel installation in addition to the existing process setup to ensure or increase performance in case of deteriorating or fluctuating crude oil quality 
  • Use as standalone solution, which takes over the treatment of oil qualities lower than API 16  and thus enables economical process control even with particularly heavy or highly saline oils
  • Installation as intermediate system from tank to tank for the profitable processing of so-called “opportunity crudes”  (crude oil that does not meet the quality standards of the industry) by reducing contamination to the level required for further processing

Design of the GEA Crude Oil Treatment System –  comprehensive know-how from a single source

The centrifuge unit is the central component that is designed either for the dehydration or the desalting of crude oil, depending on the requirements. To this end, GEA offers various types of centrifuges and capacities that are optimized for the respective separation task.

Learn more about GEA centrifuges for crude oil treatment. 


The centrifuge unit can be optionally supplemented by the following additional units:

Feed pump unit

Besleme pompası ünitesi

The feed pump unit is only required if the product does not have the feed pressure required for centrifuge operation.

Capacity: 
30 - 150m3 / h | 5,000 - 23,000 BPD

Heat exchanger unit

Isı eşanjörü ünitesi

In case the crude oil feed has to be heated in order to achieve the optimum separation viscosity, the scope of supply can be optionally extended by a crude oil heating unit.

Heating capacity:
45 °C – 105 °C | 113 - 220 °F

Multi-stage mixer unit

Çok-aşamalı karıştırıcı ünite

If high efficiency in desalting of the crude oil feed is required, this unit can be added to the scope of supply. The purpose of the mixing unit is to dilute the crude oil with wash water and to achieve a smooth mixing with a corresponding retention time of water and crude oil.

Capacity:
30 - 150 m3 / h | 5,000 - 23,000 BPD

Heat recovery unit

Isı eşanjörü ünitesi

Energy efficiency is key, and with the implementation of the heat recovery stage(s) the overall efficiency is increased and the invested energy is minimized. The carbon footprint of the process is also reduced.

Heating capacity:
660 - 3,300 kW

Chemical dosing unit

Kimyasal dozaj ünitesi

If tight emulsion or interfacial tensions occur, e.g. during process setup, they can lead to a reduced overall process performance. To counteract these effects and to keep the process performance at satisfactory levels, the use of chemicals may be unavoidable. For such cases we can supply customized dosing systems.

Capacity:
1 - 2 m³ / h | 4,4 gpm



Your benefits at a glance

  • Variable installation as a stand-alone system or for the extension of an existing installation, to compensate for bottlenecks, to expand the existing capacity and to ensure stable process control even with fluctuating feed conditions and qualities on a permanent basis
  • Thanks to the modular construction in a compact design, it has low overall space requirements and is extremely flexible to adapt to your individual setup
  • Simultaneous separation of water and solids: Water and salt particles with an efficiency of 90-99 %, solids with an efficiency of over 99 %
  • Continuous operation with an operating time of > 99.9 % operating time (depending on the individual service contract)
  • Suitable for potentially explosive areas (zone 1 and zone 2)
  • Adaptable to crude oils containing sulphur in compliance with NACE and other HSE requirements
Calculator

Online calculator

Depending on your individual feed and process conditions, our online tool gives you an initial indication of possible installation options.
Online questionnaire

Online questionnaire

By filling out our questionnaire, you help us right from the start to find the optimum solution for you based on your setup.

Keen to solve your challenge?

Haberleri GEA’dan alın

GEA haber bültenine abone olarak GEA yeniliklerinden ve hikayelerinden haberdar olun.

İletişim

Size yardımcı olmak için buradayız! Sadece bir kaç detay ile sorgulamanıza yanıt verebileceğiz.