Forced Circulation Evaporator

Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger as the calandria, with flash vessel/separator arranged above the calandria, circulation pump.

Entre em contato Faça uma cotação

Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger as the calandria, with flash vessel/separator arranged above the calandria, circulation pump.

Forced Circulation Evaporator

Entre em contato Faça uma cotação

Operation

The liquid is circulated through the calandria by means of a circulation pump, where it is superheated at an elevated pressure, higher than its normal boiling pressure. Upon entering the separator, the pressure in the liquid is rapidly reduced resulting in some of the liquid being flashed, or rapidly boiled off.

Since liquid circulation is maintained, the flow velocity in the tubes and the liquid temperature can be controlled to suit the product requirements independently of the pre-selected temperature difference.

Particular features

Long operating periods – boiling/evaporation does not take place on the heating surfaces, but in the separator. Fouling due to incrustation and precipitation in the calandria is therefore minimized.
Optimized heat exchange surface – flow velocity in the tubes determined by the circulation pump.

Fields of application

Liquids with a high tendency for fouling, highly viscous liquids, as the high concentration step in multiple-effect evaporation plants.
Forced circulation evaporators are optimally suited as crystallizing evaporators for saline solutions.

Produtos relacionados

Direct Steam Sterilization

Concentrated food products need to be sterilized before they can be stored, packed or dried.

Evaporador de Circulação Natural

Trocador de calor vertical tipo concha e tubo com tubo de pouco comprimento, com separador lateral disposto no topo.

Evaporador de placas

Uma configuração de placa e estrutura emprega placas especiais, com produto e meio de aquecimento em canais alternados. As placas são seladas pelas juntas localizadas dentro de vãos especialmente projetados que não requerem adesivos. Estas juntas podem ser inseridas e removidas sem ferramentas especiais.