Aseptomag® valve line Robinet à trois voies AXV

Aseptomag® double-chamber valves AXV are used for the mixproof shut-off of incompatible products at pipe junctions in aseptic processing plants.

Welded stainless steel bellows are used to hermetically seal the product area from outside contamination. The three integrated steam barriers (ISB) can be operated independently from each other and enable the safe separation of both product lines, even when two of the four valve seats are lifted. The integrated function of the single-seat lifting capability permits fully automatic seat cleaning during production. Thanks to the three independent steam barriers, AXV valves enables one side maintenance while production on the other side and offer maximum process and product safety.

Main Components

Housing
Housings for double chamber valves AXV are available with two, three or four connection ports. The valves are produced with standard butt-weld connections by default. Mixed connection port sizes as well as various aseptic pipe connections are available upon request.
 
Internal Assemblies
The double chamber valve AXV includes two internal assemblies with two valve seats each. The larger seats (seat B) of the internal assemblies contain a shrunk valve seat seal made of Tefasep®. The smaller valve seats (seat A) are available with shrunk or screwed valve seat seal. In addition to the standard Tefasep® sealing, other material options such as PTFE are also available. The nominal diameter of the valve is determined by the larger valve seats (valve seat B).
 
Actuator
The double chamber valve AXV includes two identical actuators. The standard version of the pneumatic actuators is designed as spring-closing / air-opening (NC) and includes single seat lifting for both valve seats (seats A+B) as well as a full valve stroke (3 valve strokes in total).
 
Clamp
Due to its solid construction, the GEA clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
 
Side valves
Each of the three sterile chambers includes a steam inlet and an outlet valve by default. The fail-safe position (NC or NO) of both side valves can be chosen independently from each other. The outlet can be equipped with integrated temperature probe which enables temperature measuring in the sterile chamber. In addition, the outlet can be configured with a divert valve to directly apply a sterile media also to the drain side of the valve.
 
Feedback units
Aseptic double chamber valves type AXV can be either equipped with open feedback units or T.VIS® feedback systems by default. Feedback units from third party suppliers can be mounted via special adaptors.

 

Technical Data of standard execution

ItemSize
Nominal pressure valve10 bar
Closing pressureapprox. 6 bar (depending on valve size)
Control air pressure6 bar
Internal AssemblyWith sheet metal bellows
Valve seat seal materialTefasep®
Surface quality in product areaRa ≤ 0.8
Material quality in product areaAISI 316L
Operating temperature-20...+150°C
Higher closing pressures, other materials, higher surface qualities and higher operating temperatures are available upon request.

Aseptomag® Valve Technology

Aseptomag® aseptic valves are designed to meet the highest demands for aseptic processes in the dairy, food and beverage industry.

Aseptic bellows valves distinguish themselves with the uncompromisingly hermetic seal of the valve stem, thereby minimizing contamination risks and maximizing detection possibilities. The Aseptomag® valve line is the equivalent for aseptic processes to the hygienic VARIVENT® valve line and provides everything from shut-off and bottom-seat to mixproof and sampling valves. The valves meet the highest hygienic standards required, such as EHEDG and 3-A standards. Thanks to the modular structure, the Aseptomag® valve line also allows tailor-made valve solutions for specific process requirements (higher closing pressures, special materials, special design, etc). Aseptomag® valves can be equipped with T.VIS® control tops and can therewith seamlessly be integrated into an automated process plant.

Aseptic Applications

For aseptic processes, the following areas have to be considered: Product sterilization, conveying and maintaining sterility, and filling under sterile conditions. Aseptic processes signify high-quality products and/or long shelf-life, produced for specific consumer groups. Besides classic UHT milk products, medical nutrition, baby food, aseptically produced beverages and applications within biotech belong to this hygienic class.

Aseptomag® at a Glance

  • Hermetic sealing by stainless steel bellows
  • Uncompromising detection possibilities
  • Highest aseptic standard
  • Easy and safe maintenance
 

Sizes *

Valve typeMetricInch OD
Shut-off Valves Aseptomag® AVDN 15 – DN 1500.75” – 6”
Shut-off Valves Aseptomag® AVBSDN 15 – DN 1500.75” – 6”
Divert Valves Aseptomag® UVDN 15 – DN 1000.75” – 4”
Shut-off Valves Aseptomag® AFDN 25 – DN 1001” – 4”
Control Valves Aseptomag® RVDN 15 – DN 1000.75” – 4”
Control Valves Aseptomag® RVINDN 25 – DN 651“ – 2.5“
Back-pressure Valves Aseptomag® GDDN 15 – DN 1500.75” – 6”
Shut-off Valves Aseptomag® AMVDN 06 – DN 100.25” – 0.5”
Leakage Valves Aseptomag® LVDN 40 – DN 1001.5“ – 4“
Leakage Valves Aseptomag® DTDN 40 – DN 1001.5“ – 4“
Leakage Valves Aseptomag® ADVDN 25 – DN 1001” – 4”
Double-chamber Valves Aseptomag® DKDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® DKBSDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® DDKDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® AXVDN 25 – DN 1501” – 6”
Sampling Valves Aseptomag® PVDN 10 – DN 150.5” – 0.75”
Steam inlet valves Aseptomag® DEDN 25 – DN 401” – 1.5”
* Additional valve sizes and connection standards (i.e. ISO) available upon request