Tratamiento de aceite
Tratamiento del Aceite Lubricante
In addition to fuel oil, lube oil also needs to have water and other impurities removed on a continuous basis. This is the only reliable way to prevent symptoms of wear appearing on engine components and thus a drop in performance or even failures. At the same time, separation increases the service life of the lube oil. GEA provides the shipping world with a broad range of separators which are ideally prepared for these tasks
Considerable symptoms of wear by contaminated oil
In daily operation, the lube oils of diesel engines are continuously contaminated. All rotating or sliding parts deposit metal impurities. Added to this are residues of the combustion process, condensed water decomposition products which settle in the lube oil sump. The oils themselves can also contain acids which, in combination with catalyzing foreign substances, can result in premature ageing of the oil. At the same time, on diesel engines, residues of the combustion process and incombustible constituents from the cylinder can also reach the lube oil circuit. These residues can lead to considerable symptoms of wear at bearing points, pistons and cylinders.
Solution: Self-cleaning separators in unsupervised operations
It is therefore all the more important to separate all unwanted substances so that the service life of the oil is prolonged and engine components are not subjected to wear. Self-cleaning separators from GEA clean and dewater the lube oil highly efficiently by the bypass method – even and especially when unsupervised 24-hour operation is involved. The full range of marine separators is available for this purpose.
Pushing the limits. The GEA marine Separator.
Central Mare: full speed ahead with new GEA marine Separator
GEA and Danaos Shipping cooperate on further development of separators - Installation of GEA marine Separator 35 on container ship ZIM LUANDA
Productos y tecnologías
Mostrar 4 de 7
Bombas de inyección
Las bombas de inyección, también denominadas eyectores, son dispositivos para transportar, comprimir o mezclar los gases, vahos, líquidos o sólidos y para producir un vacío, cuya fuerza motriz proviene de un medio líquido o gaseoso.
Mezcladores de líquidos
La mezcla es un proceso vital para fabricar una amplia gama de productos en muchas industrias. En base a su experiencia y conocimientos técnicos, GEA ofrece distintas soluciones de mezcla por lotes o mezcla continua, además de soluciones personalizadas en fábrica para aplicaciones exclusivas que satisfacen las necesidades del cliente.
Módulos de control
El módulo de control T.VIS® es un sistema óptimo de control y supervisión de las válvulas VARIVENT®, ECOVENT® y T-smart de GEA.
Separador
El separador centrífugo es una máquina en que se separan mutuamente dos líquidos de distinta densidad. Pueden separarse los sólidos al mismo tiempo.
Otras aplicaciones
GEA Insights
Preparar la cadena de frío para el futuro con una refrigeración sostenible
No se puede subestimar la importancia de una gestión de calidad de la cadena de frío. Garantizar que los alimentos perecederos sean seguros en el punto de consumo es una enorme responsabilidad para quienes gestionan las instalaciones...
