Menu

Semi-Hermetic Compressors

HG Single-Stage Compressors

The GEA Bock HG (Hermetic Gas-cooled) range of semihermetic compressors offers traditional suction gas-cooled compressor state of the art technology. These compressors of the highest quality standard excel in their running comfort, easy maintenance, efficiency and reliability.

The entire range of gas-cooled commercial GEA compressors, HG22e, HG34e, HG44e, HG66e and HG88e, is now available in the new, optimized design. In addition to their uses in the fields of refrigeration and air-conditioning, the new compressors are ideally suited for refrigeration in supermarkets. They offer improved efficiency over their predecessors, greater displacement stages, a more compact structural design, and a new configuration of connections.

Special features:

  • New design housing for maximum gas flow
  • Optimized valve plate system
  • High efficiency motors of newest generation
  • Exchangeable motor
  • Proven and reliable oil pump lubrication
  • Standard footprints
  • Standard connections

Capacity data for Low GWP refrigerants R513A as well as R450A are available within our selection software VAP.

GEA Valve plate systems

Standard valve plate construction
GEA compressors, for smaller and medium-sized capacities, are equipped with a standard valve plate design. This worldwide proven valve design is equipped with finger reed valves on suction and discharge side. The fins are made of high-quality, impact-resistant spring steel. The valve in- and outlets are flow-optimized for smaller and medium-sized capacities in order to reach an efficient compression.
HG12 P – HG56e

mexxFlow valve plate innovation
More refrigerating capacity and lower power consumption – this is the motto of the mexxFlow valve plate, which forms the heart of the new GEA compressor generations for higher capacities.  In order to increase the energy efficiency of reciprocating compressors, manufacturers has always been focused on the valve plate system. At higher capacities the standard valve plates reach their limits in terms of efficiency. With the mexxFlow, GEA was successful in increasing the efficiency of its compressors by up to 20 %. This success was achieved through a flow-optimized double ring fin construction of the valve plate in combination with a specially adapted cylinder head.
With the knowledge gained from practical experience over the past decade, we have consistently improved and further developed the mexx Flow plate system. The result: mexxFlow 2.0.
The second generation shows even greater resistance with a consistent high efficiency. This makes it suitable for the even toughest requirements of various applications.
HG66e + HG88e

Valve Plate Systems

THE CURRENT PROGRAM

7 model sizes with 25 capacity stages from 5.4 to 281.3 m³/h (50 Hz)
HG Single-Stage Compressors
Current types Displacement at 50 Hz (1450 1/min) m³/h
HG12P 5.4 6.7 8.0 9.4
HG22e 11.1 13.7 16.5
HG34e 18.8 22.1 27.3 33.1
HG44e 41.3 49.2 57.7 67.0
HG56e 73.8
86.6 
100.4
HG66e 116.5
133.8
152.2 180.0
HG88e 209.1 237.9 281.3
VAP


More information about the HG single-stage compressors (e.g. technical/performance data, drawings, spare part lists, operating limits) can be found in the compressor selection tool VAP via the following link:VAP compressor selection HG single-stage compressors

Video about mexxFlow® valve plate technology used in HG66e and HG88e compressor

Video about the entire HGe range

Related products

HA Single-Stage Compressors

HA Single-Stage Compressors

Semi-hermetic HA compressors are primarily used for deep-freezing. Suction gas intake is done directly into the compressor. Motor is cooled by an integrated ventilation unit.

HG 2-Pole Compressors

HG 2-Pole Compressors

Based on GEA compressors of the Pluscom series with their outstanding advantages and features, more powerful models with 2-pole drive motor are available for mobile use.

HG Alu Compressors

HG Alu Compressors

Based on GEA compressors of the Pluscom series with their outstanding advantages and features, light construction models made completely of aluminium are available for mobile use.

HG ATEX Compressors

HG ATEX Compressors

GEA is the first European manufacturer to offer semi-hermetic compressors conforming to ATEX-/ IECEx zone 1 and 2.

HG CO2 Compressors Subcritical

HG CO2 Compressors Subcritical

This series offers the advantages of a time-tested compressor series that has been optimally adapted to the demands of CO2.

HG CO2 T Compressors Transcritical

HG CO2 T Compressors Transcritical

The compressors are distinguished by high reliability, excellent operating performance, wide frequency band for minimum part-load needs and previously unachievable efficiency standards in the market – confirmed officially through ASERCOM.

HG HC Compressors

HG HC Compressors

Natural refrigerants are on the advance. For various applications, such as the field of supermarket refrigeration and chiller systems, hydrocarbons have established as another natural alternative.

HGZ Two-Stage Compressors

HGZ Two-Stage Compressors

Based on the 6-cylinder compressor HG7, a selection of two-stage variants is available for extended use in intense cooling. The selection of the liquid intercooler unit is available for three different refrigerants: R404A (R507), R410A and R22.

GEA Insights

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Sign up

We are here to help! With just a few details we will be able to respond to your inquiry.

Contact us