VESTA® valve line

Valve Block VESTA® HWA & HXA

VESTA® valve blocks are compact and versatile sterile valves with two independent actuators. The concept of the single-piece housing enables merging, separating or diverting of product flow in tight space conditions.

Valve Block VESTA® HWA – stainless steel actuators

Valve Block VESTA® HWA – stainless steel actuators

VESTA® valve blocks offer optimized piping by simultaneously reducing dead spaces. The significantly reduced pipe volume and the improved drainability are other characteristic features. In contrast to concepts with individual valves, solutions with VESTA® valve blocks reduce the required quantity of fittings and therefore also contribute to economical installation concepts.

Main Components

Housing
VESTA® valve blocks are available with three (type HWA) or four (type HXA) connection ports by default. With the type HXA the intermediate chamber is executed for media transfer. The single-piece housing includes three sections and is produced from one solid piece. Further housing configurations are available upon request.

Internal Assembly
The PTFE bellows are identical with those for VESTA® shut-off valves. Bellows up to DN25, OD 1" and ISO 33,7 include a tapered tip. All other valve dimensions include a regular flat seat area.
 
Actuator
Both actuators can be executed pneumatically or manually. The manual version is made of plastic in all cases. Pneumatic actuators are available in plastic or stainless steel, and the fail-safe (normally close or normally open) position can be easily reversed. Differential configurations of the two actuators are possible.
 
Control and feedback systems
Pneumatic actuators include a visual valve status indicator by default. Alternatively, visual indicators can be replaced by an open feedback unit or by using the adequate adaptor plate with a T.VIS® control and feedback system in various executions.

Technical data of the standard execution

ItemSize
Nominal pressure valve10 bar
Control air pressureActuator NC – min. 5 bar, max. 10 bar
Actuator NO – min. 5 bar, max. 6 bar
Hermetic sealing elementPTFE bellows
Surface quality in product areaRa ≤ 0.8
Material quality in product areaAISI 316L
Max. operating temperature+ 135 °C
Max. sterilization temperature+ 150° for 60 min

VESTA® valve line

VESTA® Sterile Valves
Shut-off valve VESTA® H_A – valve distribution bulkhead connection

Shut-off valve VESTA® H_A – valve distribution bulkhead connection

VESTA® sterile valves are a true asset for applications from laboratory up to highly complex process plants especially in the pharmaceutical, biotech, cosmetics industry, but can also be used in the food industry.

Thanks to the hermetic sealing of the valve stem with a PTFE bellows, VESTA® sterile valves provide a maximum level of process line isolation and therewith contribute to customers’ product and process safety.

The VESTA® valve line is specifically designed to meet the highest requirements for sterile processes in the pharmaceutical, biotech and cosmetics industry. The valve program provides everything that is required to ideally serve these industries. The high-quality valve range consists of different valve types, and thanks to the modular build-up, the valves can also be tailor-made for specific process conditions and still meet all requirements from a regulatory point of view.

VESTA® valves can be seamlessly integrated into an automated process plant by using the T.VIS® control tops.

PTFE bellows as key element
VESTA® - PTFE bellows

VESTA® - PTFE bellows

Key element of VESTA® sterile valves is a single-piece PTFE bellows made of the material TFM 1705. Adding to its excellent chemical resistance against almost all media, TFM 1705 also complies with all standards relevant for the pharmaceutical industry, such as e.g. FDA 21 CFR 177.1550 and USP class VI. The high-value surface finish (Ra ≤ 0,8 μm), the seamless and hermetic sealing as well as the CIP/SIP optimized design are other characteristic features. The patented bellows sealing system safely separates the product-wetted area from the atmosphere in all process steps and furthermore seals the valve seat.

VESTA® at a Glance
  • Optimized flow and dead-space-free design
  • Optimized CIP/SIP cleanability
  • Hermetic sealing of the product-wetted area by PTFE bellows
  • Defined sealing pre-load by metallic stop
  • Valve in accordance with EHEDG design guidelines
  • Self-locking groove nut connection
  • Safe and easy maintenance
Overview *
Valve typeMetricInch ODISO
Shut-off valvesDN 10 – DN 650.5” – 3”ISO 13.5 – ISO 76.1
Shut-off valves graduatedDN 10 – DN 650.5” – 3”ISO 13.5 – ISO 76.1
Tank-bottom valvesDN 10 – DN 650.5” – 3”ISO 13.5 – ISO 76.1
Valve blocksDN 10 – DN 650.5” – 3”ISO 13.5 – ISO 76.1
Sampling valvesDN 10 – DN 150.5” – 0.75”ISO 13.5 – ISO 17.2
* Additional valve sizes available upon request

GEA Insights

Lemgo plant building

Past and future merge in Lemgo's pioneering district heating project

Theo van der Zwaag from the Netherlands stands in front of a GEA automated feeding robot.

Automation makes a difference for cows, humans and planet

CIAL Chile Employees stand in front of a line of defrosters from GEA.

GEA's defrosting solution sees success at CIAL in Chile

Receive news from GEA

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Contact us

We are here to help! With just a few details we will be able to respond to your inquiry.