Cow Drinker & Watering

Waterer and drinking troughs for cows

Milk is 87% water; therefore, maintaining a supply of fresh, clean water is essential to high milk production. Waterers from GEA are built for strength and longevity, enduring the abuse from cattle and machinery, and they are easy to operate to guarantee your herd gets the access it needs to a fresh water supply.

Easy Drink

Drinking Trough Easy Drink
Easy Drink

  • Large capacity valve
  • Very easy to clean
  • Stainless steel
  • Length 100/190 cm

The Easy Drink has a valve with large capacity, so there is always enough water for the cows. The drinker is only available in a high-pressure version.

Low Profile Dump Waterer

  • Food-grade 304 stainless steel construction – will not rust or corrode, regardless of the quality of the water supply.
  • Smooth finish – easy to clean, which means water is fresh and consumption is increased.
  • Easy to dump – trough features a large, solid spindle inside a self-lubricating Nylatron bearing.
  • Trough rotates past 90 degrees to dump – ensuring all debris clears the tank.
  • Modified hexagonal trough – can be located closer to the wall than square designs.
  • Easy access float box – provides structural rigidity.
  • High-capacity JOBE valve – comes standard.
  • Protected hook-up and shut-off valve.
  • Hot dipped galvanized tank also available.

Standard Dump Waterer

  • Food-grade 304 stainless steel construction – will not rust or corrode, regardless of the quality of the water supply.
  • Smooth finish – easy to clean, which means water is fresh and consumption is increased.
  • Easy to dump – trough features a large, solid spindle inside a self-lubricating Nylatron bearing.
  • Trough rotates past 90 degrees to dump – ensuring all debris clears the tank.
  • Modified hexagonal trough – can be located closer to the wall than square designs.
  • Easy access float box – provides structural rigidity.
  • Hot dipped galvanized tank also available.

Petersen Concrete Waterer

  • Designed for cold barns – waterer contains 2" of durable extruded polystyrene insulation under the bowl. Ground heat will keep water lines from freezing. Also, an optional heater and thermostat with 120V or 240V electrical elements is available for any model.
  • User friendly design – large access doors with durable poly cover and hoods allow for easy installation and service. Also, choose from center or end fill.
  • Bowl design is easy to clean – it’s sanded smooth, then epoxy coated. Bowl bottoms are sloped to the 3" drain hole.
  • Easy installation – concrete cures out at a minimum of 5,500/psi at 28 days. Bolting to the floor is not necessary.
  • Reinforced concrete with 3/8" welded rebar cages – for solar heat and greater strength.

Stainless Steel Heated Dump Waterer

  • Exceptionally durable – made from food-grade stainless steel – a material that cleans easily and will not stain or rust.
  • Internal tank struts and a rolled top edge of the tank – reinforces the tank, making it virtually indestructible.
  • Trouble-free valve box cover – heavy-gauge cover with simple, spring-loaded latches.
  • Easy and simple to operate – modified hexagonal trough leaves less debris in tank when compared to a square tank. The waterer can mounted within 6" of the wall.
  • Self-lubricating Nylatron bearings – reduces friction and allows the tank to be dumped with less effort.
  • Exclusively designed valve box – heated valve box greatly reduces freezing issues. The box is kept warm using ground heat, or an optional electric heater is available. The box is equipped with a simple, proven Franklin Plunger type valve and float.
  • Separate valve box and water tank – allows water level to be controlled in the valve box and not the tank. A unique connection allows the tank to turn while the valve box is stationary.
  • Hollow leg on the valve box end – it’s insulated and covered, yet gives easy access to the water supply line, which makes installation much easier. Also, this design promotes the flow of heat from the ground into the valve box, reducing freezing.
  • Available in a variety of sizes – from 4’ to 12’ of actual drinking space.

Tip-over

DairyFarming Tip-Over Drinker
Tip-Over

  • Easy and quick cleaning by tilting the drinker
  • Available with valve and gravity system (with valve also available in a frost proof version)
  • Drinker made of stainless steel
  • The upper edge is bent downwards, thus no sharp edges
  • Length 100/177 cm, the height can be adjusted from 80-100 cm

Watermaster

Watermaster Cow Drinker
Watermaster

The robust, completely enclosed polyethylene outer wall is simultaneously insensitive to impacts, animal friendly due its lack of sharp edges and rounded shape, and also moisture-proof as a result of its protective polyurethane insulation. The latter also ensures frost-free drinking in the winter with fresh water. An optional heating element may be retrofitted for extreme frost periods. The float has a high capacity and can be maintained without the use of tools.

  • Optimal fresh water concept
  • Frost-free due to polyurethane foam layer
  • Optional heating element for extremely low temperatures
  • Robust polyethylene outer shell
 
;